cygwin 2.5.1 upgrade question.


I have upgraded a cygwin WindowXP system from Amanda 2.4.5P1 to 2.5.1p1.

The compile and install went with out problems.

When I run amcheck on the server to the client I the dreaded "waiting for
ACK".

        zorn->[117] > !83
        amcheck -c daily coriolis

        Amanda Backup Client Hosts Check
        --------------------------------
        WARNING: coriolis: selfcheck request failed: timeout waiting for ACK
        Client check: 1 host checked in 30.155 seconds, 1 problem found
        (brought to you by Amanda 2.5.1p1)

Below is the debug file. The debug file seems to show that I am binding to a
socket on the client so I assume I am getting that far.

        zorn->[119] > less amcheck.20061004152609.debug
        amcheck: debug 1 pid 29280 ruid 30002 euid 0: start at Wed Oct  4
15:26:09 2006
        amcheck: debug 1 pid 29280 ruid 30002 euid 30002: rename at Wed Oct
4       15:26:09 2006
        security_getdriver(name=BSD) returns ff2e1458
        security_handleinit(handle=391f8, driver=ff2e1458 (BSD))
        amcheck-clients: time 0.132: bind_portrange2: Try  port 819:
Available       - Success
        amcheck-clients: time 0.132: dgram_bind: socket bound to 0.0.0.0.819
        amcheck-clients: dgram_send_addr(addr=ffbf7150, dgram=ff2e17d4)
        amcheck-clients: time 0.145: (sockaddr_in *)ffbf7150 = { 2, 10080,
128.210.3.202 }
        amcheck-clients: dgram_send_addr: ff2e17d4->socket = 4
        amcheck-clients: dgram_send_addr(addr=ffbf6ff8, dgram=ff2e17d4)
        amcheck-clients: time 10.154: (sockaddr_in *)ffbf6ff8 = { 2, 10080,
128.210.3.202 }
        amcheck-clients: dgram_send_addr: ff2e17d4->socket = 4
        amcheck-clients: dgram_send_addr(addr=ffbf6ff8, dgram=ff2e17d4)
        amcheck-clients: time 20.164: (sockaddr_in *)ffbf6ff8 = { 2, 10080,
128.210.3.202 }
        amcheck-clients: dgram_send_addr: ff2e17d4->socket = 4
        security_seterror(handle=391f8, driver=ff2e1458 (BSD) error=timeout
waiting for ACK)
        security_close(handle=391f8, driver=ff2e1458 (BSD))
        amcheck: pid 29280 finish time Wed Oct  4 15:26:39 2006

I used the same configure file to compile and install both versions. 

I link /pkgs/amanda to the /pkgs/amanda-version-number and I only have to
move the link to version I want to use. 2.4.5p1 works fine. 2.5.1p1 does
not. 

I do not get any debug log files in /tmp/amanda on the client side. My entry
to my inetd.conf does not change since I change the link to my version

        amanda  dgram  udp  wait  SYSTEM  /pkgs/amanda/libexec/amandad
amandad

I am trying to look for differences but I cannot see anything. 

Has anyone upgraded a Cygwin WinXP system to Amanda 2.5.1p1? If so did you
have any particular problems with the latest version? 

Thanks

Robert


_____________________________________________________________________
Robert P. McGraw, Jr.
Manager, Computer System                 EMAIL: rmcgraw AT purdue DOT edu
Purdue University                         ROOM: MATH-807
Department of Mathematics                PHONE: (765) 494-6055
150 N. University Street                   FAX: (419) 821-0540
West Lafayette, IN 47907-2067
smime.p7s
Description: S/MIME cryptographic signature