<quote who="Paul Bijnens">
> On 2006-08-08 16:17, Gavin Henry wrote:
>>
>> Currently trying to compile 2.5.0p2 with:
>>
>> ./configure --with-user=amanda --with-group=disk --with-ssh-security
>> --with-config=Suretec --with-changer-device=/dev/sg2
>> --with-tape-device=/dev/nst0
>>
>> But configure just sits there at:
>>
>> checking for smbclient... /usr/bin/smbclient
>>
>> Same when adding --with-smbclient=/usr/bin/smbclient
>
>
> If you do not need smbclient support, then you can configure
> with "--without-smbclient" and work around this problem.
I have tried that, and with --with-smbclient=no.
I've been going through configure.in to see what the probs are.
>
> If you do need it... then try to investigate what is blocking.
> It seems like "configure" is hanging in one of the next steps.
>
> Configure tries to find out what version of smbclient you have
> by running the command:
>
> smbclient '\\not.a.host.name\notashare' -U nosuchuser -N -Tx /dev/null
Looks like it's this. It just hangs.
I just setup 2 clients on Fedora Core 5 with 2.5.0p2, and they both are fine.
The server is on a SUSE 9.3 x86_64 box, that has (Is a Samba PDC too):
free -m
total used free shared buffers cached
Mem: 3961 296 3665 0 48 154
-/+ buffers/cache: 93 3868
Swap: 2070 0 2070
uname -a
Linux nas1 2.6.14.2-smp #2 SMP Thu Nov 17 15:31:40 GMT 2005 x86_64 x86_64
x86_64 GNU/Linux
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 73G 6.0G 67G 9% /
tmpfs 2.0G 0 2.0G 0% /dev/shm
/dev/sdb 6.9T 263G 6.6T 4% /storage
lsscsi
[0:0:0:0] disk ATA HTS541080G9SA00 MB4O /dev/sda
[4:0:1:0] tape CERTANCE ULTRIUM 2 1775 /dev/st0
[4:0:1:1] mediumx QUANTUM UHDL 000E -
[6:0:0:0] disk Areca ARC-1160-VOL#00 R001 /dev/sdb
>
> What happens if you run that manually?
Hangs
> The output of that step does not appear on screen however, so it could
> be that configure is actually hanging on the step after that.
I think it's smbclient that is the problem.
>
> The next step is finding out where the "gzip" program lives.
> Is does that by looking in several directories.
> If one of those directories happens to be mounted on a non-responsive
> NFS-server, you hang here too.
>
> The list of directories is:
> /bin:/usr/bin:/sbin:/usr/sbin:/usr/ucb:/usr/bsd:/etc:/usr/etc
> /usr/local/sbin:/usr/local/bin:/usr/ccs/bin
> and the value of $PATH from the user that runs configure.
>
> Anything strange when trying "test -e /bin/gzip"? (Try that for
> all the above dirs)
Nope, looks fine.
>
>
> --
> Paul Bijnens, xplanation Technology Services Tel +32 16 397.511
> Technologielaan 21 bus 2, B-3001 Leuven, BELGIUM Fax +32 16 397.512
> http://www.xplanation.com/ email: Paul.Bijnens AT xplanation DOT com
> ***********************************************************************
> * I think I've got the hang of it now: exit, ^D, ^C, ^\, ^Z, ^Q, ^^, *
> * F6, quit, ZZ, :q, :q!, M-Z, ^X^C, logoff, logout, close, bye, /bye, *
> * stop, end, F3, ~., ^]c, +++ ATH, disconnect, halt, abort, hangup, *
> * PF4, F20, ^X^X, :D::D, KJOB, F14-f-e, F8-e, kill -1 $$, shutdown, *
> * init 0, kill -9 1, Alt-F4, Ctrl-Alt-Del, AltGr-NumLock, Stop-A, ... *
> * ... "Are you sure?" ... YES ... Phew ... I'm out *
> ***********************************************************************
>
>
|
