I seem to be
having an awful time with configuring chg-scsi:
-bash-3.00$
amlabel dailyset dailyset0 slot 0 changer: got exit: 2 str: <error>
<error> could not read result from "/usr/local/libexec/chg-scsi" (got
signal 11) amlabel: could not load slot "0": <error> could not read
result from "/usr/local/libexec/chg-scsi" (got signal 11) amlabel: could not
load slot "0": <error> could not read result from
"/usr/local/libexec/chg-scsi" (got signal 11) amlabel: pid 731 finish time
Mon May 1 13:47:55 2006 -bash-3.00$
-bash-3.00$ chg-scsi -info Segmentation Fault
(core dumped) -bash-3.00$
-bash-3.00$ cat chg-scsi.conf
number_configs
1 eject
1 # Tapedrives need an eject
command sleep 15 # Seconds
to wait until the tape gets
ready cleanmax
10 # How many times could a cleaning tape get
used #changerdev
/dev/rmt/0cbn # # config
0 drivenum
0 dev
/dev/nrst36 # the device that is used for the tapedrive
0 startuse
0 # The slots associated with the drive
0 enduse
17 #
statfile
/usr/local/etc/amanda/tape5-slot # The file where the actual slot is
stored cleancart
18 # the slot where the cleaningcartridge for
drive 0 is located cleanfile
/usr/local/etc/amanda/tape0-clean # The file where the cleanings are
recorded usagecount
/usr/local/etc/amanda/backup/totaltime
|