Success story:


Ultrium LTO 1 tapetype (100G, amtapetype works for 4 hours):

define tapetype Ultrium1 {
    comment "just produced by tapetype prog (hardware compression on)"
    length 101376 mbytes
    filemark 0 kbytes
    speed 13867 kps
}


Changer settings:

amanda.conf:

tpchanger "chg-scsi"    # the tape-changer glue script
tapedev "0"     # the no-rewind tape device to be used
changerfile "/etc/amanda/.../changer.conf"
changerdev "/dev/sg3"


changer.conf:

number_configs   1
emubarcode       1
havebarcode      0
debuglevel       0:0
eject            1
sleep            30

# Found in dmesg
changerdev   /dev/sg3

config             0
cleancart        20
drivenum           0
# I'm using Linux
dev              /dev/nst0
# scsitapedev doesn't work, sg4 is NOT attached to any device
# according to dmesg
#scsitapedev   /dev/sg4
# I have 20 tapes
startuse          0
enduse            19

statfile /var/.../tape0-slot #
cleanfile /var/.../tape0-clean #
usagecount /var/.../tape0-totaltime #
tapestatus /var/.../tape0-tapestatus #
labelfile /var/.../labelfile #


I hope someone find this useful...

-- 
Regards, Alexey I. Froloff
AIF5-RIPN, AIF5-RIPE
-------------------------------------------
  Inform-Mobil, Ltd. System Administrator
       http://www.inform-mobil.ru/
Tel: +7(095)504-4709, Fax: +7(095)513-1006

pgpkSiOtp8dJ6.pgp
Description: PGP signature