Greetings,
I'm testing amanda 2.4.4p2 on mix of FreeBSD stable/current and
debian stable/testing boxes, and one debian testing box
is acting up. It has a single partition, and I want
to dump its /root and /etc directories. The /etc dump
seems to work fine, but when it dumps /root, it takes the
entire partition. This does not happen on any of the other
four machines. None of the other machines has just a single
partition, if it matters.
I've attached the disklist and the backup report.
Any pointers, etc. would be much appreciated.
Thanks,
Russell
*************************************************************
Here's the disklist. Commented out entries work just fine
on my other systems. I've tried all of the possible naming
schemes on brower, but they all fail the same way.
#brower /etc / {
# comp-root-tar
#}
brower /root / {
comp-root-tar
}
#aristotle /dev/hda1/etc /dev/hda1 {
# comp-root-tar }
#1 local
#aristotle /dev/hda1/root /dev/hda1 {
# comp-root-tar
#} 1 local
#feyerabend /dev/twed0s1a/etc /dev/twed0s1a {
# comp-root-tar
#}
#feyerabend /dev/twed0s1a/root /dev/twed0s1a {
# comp-root-tar
#}
#quine /dev/ad0s1a/etc /dev/ad0s1a {
# comp-root-tar
#}
#quine /dev/ad0s1a/root /dev/ad0s1a {
# comp-root-tar
#}
#leopold /dev/hda1/etc /dev/hda1 {
# comp-root-tar
#}
#leopold /dev/hda1/root /dev/hda1 {
# comp-root-tar
#}
*************************************************************
Here's the backup report, there's only a few MB in brower's
/root directory, and from the error output it's clearly dumping
outside of /root.
These dumps were to tapes pinyon17, pinyon1.
The next 3 tapes Amanda expects to used are: a new tape, a new tape, a new
tape.
The next 3 new tapes already labelled are: pinyon2, pinyon3, pinyon4.
FAILURE AND STRANGE DUMP SUMMARY:
brower /root lev 0 FAILED ["data write: Connection reset by peer"]
brower /root lev 0 FAILED [dump to tape failed]
STATISTICS:
Total Full Daily
-------- -------- --------
Estimate Time (hrs:min) 0:00
Run Time (hrs:min) 2:35
Dump Time (hrs:min) 2:18 2:18 0:00
Output Size (meg) 8549.0 8549.0 0.0
Original Size (meg) 12614.4 12614.4 0.0
Avg Compressed Size (%) 67.8 67.8 --
Filesystems Dumped 2 2 0
Avg Dump Rate (k/s) 1053.6 1053.6 --
Tape Time (hrs:min) 2:18 2:18 0:00
Tape Size (meg) 8549.0 8549.0 0.0
Tape Used (%) 177.7 177.7 0.0
Filesystems Taped 2 2 0
Avg Tp Write Rate (k/s) 1053.5 1053.5 --
USAGE BY TAPE:
Label Time Size % Nb
pinyon17 1:07 4274.4 88.8 1
pinyon1 1:12 4274.6 88.8 1
FAILED AND STRANGE DUMP DETAILS:
/-- brower /root lev 0 FAILED ["data write: Connection reset by peer"]
sendbackup: start [brower:/root level 0]
sendbackup: info BACKUP=/bin/tar
sendbackup: info RECOVER_CMD=/bin/gzip -dc |/bin/tar -f... -
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
| gtar: ./dev/log: socket ignored
| gtar: ./home/rcarter/.xine/session.0: socket ignored
| gtar: ./tmp/.X11-unix/X0: socket ignored
| gtar: ./tmp/.X11-unix/X64: socket ignored
| gtar: ./tmp/.font-unix/fs7100: socket ignored
| gtar: ./tmp/ssh-QKL11640/agent.11640: socket ignored
| gtar: ./tmp/ssh-ZbGx8745/agent.8745: socket ignored
| gtar: ./tmp/ssh-bRI11629/agent.11629: socket ignored
| gtar: ./tmp/ssh-lnPt8762/agent.8762: socket ignored
\--------
NOTES:
planner: Adding new disk brower:/etc.
planner: Adding new disk brower:/root.
taper: tape pinyon17 kb 4928480 fm 2 writing file: No space left on device
taper: retrying brower:/root.0 on new tape: [writing file: No space left on
device]
taper: tape pinyon1 kb 4377248 fm 1 [OK]
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-------------------------- --------------------------------- ------------
brower /etc 0 64582404376991 67.8 66:541090.5 66:541090.4
brower /root 0 64589504377195 67.8 71:351019.1 71:361019.0
(brought to you by Amanda version 2.4.4p2)
*************************************************************
|