Jon,
Jay,
I think you both got it -- brain fry on my part and was saying
"DLT 4000" and thinking "DLT 8000".
We've exceeded capacity... I'll discuss with my manager, we'll
have to find another drive (we don't control what's on the
disk volume).
thanks,
Brian
> On Thu, Feb 12, 2004 at 01:49:52PM -0500, Brian Cuttler wrote:
> > Hello Amanda Users,
> >
> > I'm a little baffled by this...
> >
> > Amanda 2.4.2p2 on Solaris 5.8
> >
> > partition is 32-ish Gig
> > /dev/dsk/c1t10d0s0 35006272 31531391 3124819 91% /sambashare
> >
> > Tape is a DLT 4000, we use SW compression which gave us a 20 Gig
> > file to move to tape.
>
> But DLTtape IV in a DLT4000 is 20GB native; so you will either
> just-barely-work, or fail.
>
> > NOTES:
> > taper: tape GRIFSERV03 kb 19937792 fm 1 writing file: short write
> > amflush: /amanda/work/20040211/grifserv._sambashare.0: taper error,
> > leaving file on disk
>
> And it failed, at 19.9GB. No surprise. You either need a bigger
> tape drive, or multiple tapes.
>
> --
> Jay Lessert jay_lessert AT accelerant DOT net
> Accelerant Networks Inc. (voice)1.503.439.3461
> Beaverton OR, USA (fax)1.503.466.9472
|