On Tue, 21 Jan 2003 at 3:08pm, Oleksandr Darchuk wrote

> ---------
> Jan 20 16:22:38 b2resec kernel: Timer Expired
> Jan 20 16:22:38 b2resec kernel: aic7xxx_abort returns 0x2003
> Jan 20 16:22:38 b2resec kernel: scsi1:0:6:0: Attempting to queue a TARGET 
> RESET message
> Jan 20 16:22:38 b2resec kernel: aic7xxx_dev_reset returns 0x2003
> Jan 20 16:22:38 b2resec kernel: Recovery SCB completes
> Jan 20 16:22:43 b2resec kernel: scsi: device set offline - not ready or 
> command retry failed after bus reset: host 1 channel 0 id 6 lun 0
> Jan 20 16:22:43 b2resec kernel: st0: Error 10000 (sugg. bt 0x0, driver bt 
> 0x0, host bt 0x1).
> Jan 20 16:22:43 b2resec kernel: st0: Error 10000 (sugg. bt 0x0, driver bt 
> 0x0, host bt 0x1).
> Jan 20 16:22:43 b2resec kernel: st0: Error on write filemark.
> ----------
> 
> Can anyone help me? Thanx for all advises. And sorry for pure english.

This is a general SCSI and/or hardware issue -- it has nothing to do with 
amanda.  So the usual procedures apply -- check your cables, cable length, 
termination, etc.  Try the tape drive on another machine.  Try another 
SCSI device on this chain.  Sacrifice a new goat.  Etc.

-- 
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University