Greetings! For some time, we have been experiencing errors in our
amanda backup report, as outlined below. The other admin and myself
believe that this more than likely has something to do with the fact
that that amanda spools to /localdisk0 and is supposed to backup that
partition as well.
These errors are occuring with amanda 2.4.3b2 on FreeBSD 4.6-STABLE.
The config file is rather large, so I haven't attached it, although I'd
be more than happy to provide any requested snippets. Thank you for any
and all help or ideas!
These dumps were to tape NEXTRIALS007.
The next tape Amanda expects to use is: NEXTRIALS008.
FAILURE AND STRANGE DUMP SUMMARY:
anubis /local0 lev 0 FAILED [/sbin/dump returned 3]
STATISTICS:
Total Full Daily
-------- -------- --------
Estimate Time (hrs:min) 0:13
Run Time (hrs:min) 2:22
Dump Time (hrs:min) 3:04 2:27 0:37
Output Size (meg) 4760.3 2810.2 1950.2
Original Size (meg) 9306.8 5132.3 4174.5
Avg Compressed Size (%) 51.1 54.8 46.7 (level:#disks
...)
Filesystems Dumped 48 5 43 (1:42 2:1)
Avg Dump Rate (k/s) 440.8 325.8 897.2
Tape Time (hrs:min) 0:22 0:13 0:10
Tape Size (meg) 4762.8 2810.4 1952.3
Tape Used (%) 13.6 8.0 5.6 (level:#disks
...)
Filesystems Taped 48 5 43 (1:42 2:1)
Avg Tp Write Rate (k/s) 3660.6 3775.9 3506.4
^L
FAILED AND STRANGE DUMP DETAILS:
/-- anubis /local0 lev 0 FAILED [/sbin/dump returned 3]
sendbackup: start [anubis:/local0 level 0]
sendbackup: info BACKUP=/sbin/dump
sendbackup: info RECOVER_CMD=/usr/bin/gzip -dc |/sbin/restore -f... -
sendbackup: info COMPRESS_SUFFIX=.gz
sendbackup: info end
| DUMP: Date of this level 0 dump: Wed Nov 13 03:32:41 2002
| DUMP: Date of last level 0 dump: the epoch
| DUMP: Dumping /dev/twed0s1d (/local0) to standard output
| DUMP: mapping (Pass I) [regular files]
| DUMP: mapping (Pass II) [directories]
| DUMP: estimated 2969939 tape blocks.
| DUMP: dumping (Pass III) [directories]
| DUMP: dumping (Pass IV) [regular files]
| DUMP: 13.67% done, finished in 0:31
| DUMP: 26.81% done, finished in 0:27
| DUMP: 40.41% done, finished in 0:22
| DUMP: 55.57% done, finished in 0:15
| DUMP: 69.28% done, finished in 0:11
? DUMP: DUMP: read error from /dev/twed0s1d: Invalid argument:
[block
+-1367993020]: count=10240
? read error from /dev/twed0s1d: Invalid argument: [block -1367993000]:
+count=6144
? DUMP: read error from /dev/twed0s1d: Invalid argument: [sector
-1367993000]:
+count=512
? DUMP: read error from /dev/twed0s1d: Invalid argument: [sector
-1367992999]:
+count=512
? DUMP: read error from /dev/twed0s1d: Invalid argument: [sector
-1367992998]:
+count=512
? DUMP: read error from /dev/twed0s1d: Invalid argument: [sector
-1367992997]:
+count=512
? DUMP: read error from /dev/twed0s1d: Invalid argument: [sector
-1367992996]:
+count=512
? DUMP: read error from /dev/twed0s1d: Invalid argument: [sector
-1367992995]:
+count=512
<etc, etc, etc...>
Thanks again!
Joshua D. Bello <josh AT nextrials DOT com>
Systems Administrator
Nextrials, Inc.
|