Error received on amcheck. Config problem assistance please....
2002-11-07 18:07:00
I have tried many things, so I am really hoping some people can help me out..
On RedHat 8 Linux
amanda 2.4.2p2-9
mtx-1.2.16-5
Qualstar Library (robot) /dev/sg/h0c0t0l0
2 tape drives: /dev/st/nh0c0t1l0 & /dev/st/nh0c0t2l0
When I run this command: sudo -u amanda amcheck DailySet1/ ( run as the amanda
user)
I get this output error:
Amanda Tape Server Host Check
-----------------------------
Holding disk /var/tmp: 2872580 KB disk space available, that's plenty
amcheck-server: slot 1: reading label: Input/output error
amcheck-server: fatal slot /usr/lib/amanda/chg-zd-mtx:: line 253: [: too many
arguments
ERROR: new tape not found in rack
(expecting a new tape)
NOTE: skipping tape-writable test
NOTE: info dir /var/lib/amanda/DailySet1/curinfo: does not exist
NOTE: it will be created on the next run
NOTE: index dir /var/lib/amanda/DailySet1/index/localhost: does not exist
Server check took 334.347 seconds
Amanda Backup Client Hosts Check
--------------------------------
Client check: 1 host checked in 0.018 seconds, 0 problems found
(brought to you by Amanda 2.4.2p2)
What can I check? Where do those files ( the not found ones) come from?
Here are my configs:
In my /etc/amanda/DailySet1 directory I have these files:
amanda.conf
changer.conf
disklist
Here is my amanda.conf (usefull parts)
runtapes 1 # number of tapes to be used in a single run of amdump
tpchanger "chg-zd-mtx" # the tape-changer glue script
tapedev "/dev/st/nh0c0t1l0" # the no-rewind tape device to be used
#rawtapedev "/dev/null" # the raw device to be used (ftape only)
changerfile "/etc/amanda/DailySet1/changer"
#changerfile "/var/lib/amanda/DailySet1/changer-status"
#changerfile "/etc/amanda/DailySet1/changer.conf"
changerdev "/dev/sg/h0c0t0l0"
#tapetype DLT8000-40 # what kind of tape it is (see tapetypes below)
tapetype DLT # what kind of tape it is (see tapetypes below)
labelstr "^DailySet1[0-9][0-9]*$" # label constraint regex: all tapes must
match
Here is my changer.conf ( this is the whole thing )
firstslot=1 #### First storage slot (element) -- required
lastslot=30 #### Last storage slot (element) -- required
cleanslot=6 #### Slot with cleaner tape -- default is "-1"
# #### Set negative to indicate no cleaner available
#
# # Do you want to clean the drive after a certain number of accesses?
# # NOTE - This is unreliable, since 'accesses' aren't 'uses', and we
# # have no reliable way to count this. A single amcheck could
# # generate as many accesses as slots you have, plus 1.
# # ALSO NOTE - many modern tape loaders handle this automatically.
#
autoclean=1 #### Set to '1' or greater to enable
#
autocleancount=99 #### Number of access before a clean.
#
havereader=1 #### If you have a barcode reader, set to 1.
#
offline_before_unload=1 #### Does your robot require an
and my disklist
localhost /etc comp-root-tar
What tests can I run? mtx tests? mt tests?
All help or suggestions appreciated.
Thanks
Mark
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Error received on amcheck. Config problem assistance please....,
Gustave Eiffel <=
|
|
|