Hi Remco and Efim,
I set the TSM option ndmpportrange 10000,10010, but no success.
User and password is correct.
/Bo
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Remco Post
Sent: 21. december 2017 12:04
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] NDMP backup over LAN.
you say that there are no firewall restrictions, and I believe you. But, the
port number used is quite high. There is a setting, ndmpportrange for the TSM
server. We noticed that setting that to 10000,10010 did help, despite the lack
of firewalls.
> Op 20 dec. 2017, om 10:32 heeft Bo Nielsen <boanie AT DTU DOT DK> het
> volgende geschreven:
>
> I need to backup an Isilon storage system over LAN, since there are approx.
> 40 km between TSM server and Storage system. I have created its own domain
> for this backup, with its own storage pool.
> I have defined a node and a datamover with type = NAS.
>
> When I start a backup:
> backup node dcc-isilon01 / ifs toc = no mode = full
>
> I get this error:
>
> 12/06/2017 08:52:18 ANR0984I Process 155 for BACKUP NAS (FULL) started in the
> BACKGROUND at 08:52:18. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:18 ANR1063I Full backup or NAS node DCC-ISILON01, file
> system / ifs, started as process 155 by administrator
> BOANIE. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4399E NAS file server 130.225.82.184 is reporting NDMP
> error number 23: A data connection could not be
> established. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR4794E The NAS file server 130.225.82.184 failed to
> open an NDMP data connection to the TSM tape server.
> Please verify that the file server is capable of
> outbound data connections. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR4728E Server connection to file server DCC-ISILON01
> failed. Please check the attributes of the file server
> specified during definition of the data transfer.
> (SESSION:
> 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1096E NAS Backup to TSM Storage Process 155 terminated
> - storage media inaccessible. (SESSION: 78516, PROCESS:
> 155)
> 12/06/2017 08:52:21 ANR0985I Process 155 for BACKUP NAS (FULL) running in the
> BACKGROUND completed with completion state FAILURE at
> 8:52:21. (SESSION: 78516, PROCESS: 155)
> 12/06/2017 08:52:21 ANR1893E Process 155 for BACKUP NAS (FULL) completed with
> a completion state of FAILURE. (SESSION: 78516, PROCESS:
> 155)
>
> Errors from the Filer:
>
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP
> data.c:358:ndmpdDataAbort Cannot abort Data Server in idle state
> 2017-12-06 08:08:14 dcchome-2-1 isi_ndmp_d[21867]: ERRO:NDMP
> data.c:311:ndmpdDataStop Data Server not in halted state; state=IDLE
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
> data.c:918:ndmpdDataConnect_v4 Unable to connect to addr:xxx.xx.xx.xx
> port:60817 - Operation timed out
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
> data.c:952:ndmpdDataConnect_v4 Could not connect to server
> 2017-12-06 10:35:29 dcchome-2-1 isi_ndmp_d[46349]: ALRT:NDMP
> data.c:352:ndmpdDataAbort Received NDMP_DATA_ABORT
>
> All ports between Filer and TSM are open. Firewall on windows server hosting
> TSM is disabled.
>
> Regards
>
> Bo Nielsen
>
>
> IT Service
>
>
>
> Technical University of Denmark
>
> IT Service
>
> Frederiksborgvej 399
>
> Building 109
>
> DK - 4000 Roskilde
>
> Denmark
>
> Mobil +45 2337 0271
>
> boanie AT dtu DOT dk<mailto:boanie AT dtu DOT dk>
—
73 de Remco Post, PE1PIP
|