Hi,
I think that this instruction from p.3  is what you are looking for:
http://www-01.ibm.com/support/docview.wss?uid=swg27018195 
<http://www-01.ibm.com/support/docview.wss?uid=swg27018195>
if you want to change mount points name in the non-root luns the only way is 
restore tsm db with relocation. This is preffered metod in all cases because 
you can test it without stoping production.

AIX version chose:

Recommended levels from TSM side:
http://www-01.ibm.com/support/docview.wss?rs=663&context=SSGSG7&q1=ServerRequirements&q2=AIX&uid=swg21052220&loc=en_US&cs=utf-8&lang=en

Recommended levels from DB2 side:
http://www-01.ibm.com/support/docview.wss?uid=swg21165448

So you can use:

TL03: Service Pack 2 or higher (due to AIX APAR IV53587)
TL02: Service Pack 2 or higher
TL01: Service Pack 6 or higher

Efim


> 6 мая 2016 г., в 19:55, Rhodes, Richard L. <rrhodes AT FIRSTENERGYCORP DOT 
> COM> написал(а):
> 
> Hello,
> 
> Current:  TSM v6.3.5 on AIX 6100-09
> New:      TSM v6.3.5 on AIX 7something
> 
> Well, it's time to rollover our TSM AIX servers.  We're purchases new pSeries 
> chassis that are getting lpar'ed up to replace the existing systems.
> 
> New lpars will be AIX v7.
> All storage is SAN based on either IBM or EMC storage arrays.
> All TSM/DB2 pieces/parts are on separate luns from AIX/rootvg.
>  In rootvg lun:
>     Whatever TSM/DB2 puts in /opt, /var/, /usr
>     (tsm client stuff is in here)
>  In non-rootvg luns:
>     db2 vols
>     db2 log vols (active/mirror/archive)
>     db2 sqllib dir
>     tsm stuff (dsmserv.opt, volhist, etc)
>     tsm disk pools
> 
> We would like to
>  - setup new/clean lpars with AIX v7 on the new chassis
>  - install TSM/DB2 binaries
>  - SWING THE non-rootvg luns from the old lpar to the new lpar
>  - bring up TSM . . .
> Is it really that easy????
> 
> 
> PROBLEM - I can't find anything on how to swing a DB2 database from one AIX 
> lpar to a new/clean lpar.  We're a Oracle shop - no one knows DB2 around here.
> 
> 
> Q)  Has anyone done a TSM storage swing like this?
> 
> 
> We are planning a TSM v7.1 upgrade.  We may need to do this to get to AIX v7. 
>  I have to check this out.
> 
> Thanks
> 
> Rick
> 
> 
> 
> 
> 
> -----------------------------------------
> The information contained in this message is intended only for the personal 
> and confidential use of the recipient(s) named above. If the reader of this 
> message is not the intended recipient or an agent responsible for delivering 
> it to the intended recipient, you are hereby notified that you have received 
> this document in error and that any review, dissemination, distribution, or 
> copying of this message is strictly prohibited. If you have received this 
> communication in error, please notify us immediately, and delete the original 
> message.