Further to my message below, the "q library f=d" command does display details
about the library, as does the "show library" command.
tsm: TSMANL>q library f=d
Library Name: LB0.1.0.6
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
WORM Scratch Category:
External Manager:
RSM Media Type:
Shared: No
LanFree:
ObeyMountRetention:
Primary Library Manager:
WWN:
Serial Number: 00L4U78L0331_LL0
AutoLabel: No
Reset Drives: No
Relabel Scratch: No
ZosMedia:
Last Update by (administrator): ADMIN
Last Update Date/Time: 12/09/2013 17:38:36
tsm: TSMANL>show library
MMSV->libList: head=000000000537E930, tail=000000000537E930
Library LB0.1.0.6 (type SCSI):
refCount=0, online=0, updateCount=0
basicCfgBuilt=1, libInfoBuild=0, definingPathToLibrary=0
addLibPath=0, borrowedDrives=0
passthru=-1
library extension at 0000000005326530
Serial Number: (00L4U78L0331_LL0)
WWN: *EMPTY*
SCSI library scanInProgress=0, relabelScratch=0
autochanger list:
dev=lb2.1.0.2, busy=0, online=0
drive list:
L6DRI0:
Device Type = LTO,
Drive state: UNKNOWN, Drive descriptor state: NO PENDING CHANGES,
Online = 1, polled = 0, nativeFilePolled = 0
Inquiry String = ULT3580-HH6,
Device Type From Inquiry = 21,
RD Capabilities = 00000FC0,
(ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5,ULTRIUM4C,ULTRIUM4),
WR Capabilities = 00000F00,
(ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5),
Serial Number: (1068020440)
WWN: (5000E111312AF001)
priorReadFailed = 0, priorWriteFailed = 0, priorLocateFailed = 0,
Update count = 0, checking = 0, passthru = -1,
offline time/date: 00:00:00 1900/00/00
SCSI-specific fields:
CleaningFreq(GB)=-1, KBytesProc=0, needsCleaning=0.
appendOnlySupported=-1, appendOnly=0.
lbpRequired=0, lbpEnabled=0, nativeFileExists=-1.
None
However the update library command fails with the error below:
tsm: TSMANL>update library lb0.1.0.6 libtype=scsi shared=no resetd=no
autolabel=no relabelscr=no serial=00L4U78L0331_LL0
ANR8529E UPDATE LIBRARY: Unable to open library LB0.1.0.6 by using an open
system call.
ANS8001I Return code 11.
Thanks & Regards
Paul
From: Paul_Dudley [mailto:pdudley AT anl.com DOT au]
Sent: Thursday, 17 March 2016 11:02 AM
To: 'ADSM: Dist Stor Manager'
Subject: Library offline issue
We are running TSM version 6.3 on a Windows 2008 server with an IBM TS3200 tape
library. The windows server crashed overnight. It has been rebooted and is
working ok now however TSM will not talk to the tape library drives.
I have powered the tape library off and on and have also performed a clean
shutdown and restart of the server.
When I run "q path" it reports that the library is online.
tsm: TSMANL>q path
Source Name Source Type Destination Destination On-Line
Name Type
----------- ----------- ----------- ----------- -------
TSMANL SERVER LB0.1.0.6 LIBRARY Yes
TSMANL SERVER L6DRI0 DRIVE Yes
TSMANL SERVER L6DRI1 DRIVE Yes
TSMANL SERVER L6DRI2 DRIVE Yes
tsm: TSMANL>q path f=d
Source Name: TSMANL
Source Type: SERVER
Destination Name: LB0.1.0.6
Destination Type: LIBRARY
Library:
Node Name:
Device: lb2.1.0.2
External Manager:
ZOS Media Server:
Comm. Method:
LUN:
Initiator: 0
Directory:
On-Line: Yes
When I run "q drive" it reports that the drives are online.
tsm: TSMANL>q drive
Library Name Drive Name Device Type On-Line
------------ ------------ ----------- -------------------
LB0.1.0.6 L6DRI0 LTO Yes
LB0.1.0.6 L6DRI1 LTO Yes
LB0.1.0.6 L6DRI2 LTO Yes
However the status of the drives is unknown
tsm: TSMANL>q drive f=d
Library Name: LB0.1.0.6
Drive Name: L6DRI0
Device Type: LTO
On-Line: Yes
Read Formats:
ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5,ULTRIUM4C,ULTRIUM4
Write Formats:
ULTRIUM6C,ULTRIUM6,ULTRIUM5C,ULTRIUM5
Element: 256
Drive State: UNKNOWN
Volume Name:
Allocated to:
WWN: 5000E111312AF001
Serial Number: 1068020440
Last Update by (administrator): ADMIN
Last Update Date/Time: 06/04/2015 11:38:08
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
When I try to update the drive I get the following error informing me that the
drive is unavailable.
tsm: TSMANL>update drive lb0.1.0.6 l6dri0 serial=avoid online=yes
ANR8444E UPDATE DRIVE: Library LB0.1.0.6 is currently unavailable.
ANS8001I Return code 14.
I can login to the library via the browser GUI and it all looks OK. The "q
libvol" command seems to work OK and returns the results I expect.
When I check the properties of the SCSI tape drive devices on the windows
server they report that the devices are working properly.
Any suggestions? Do I have to run an "update path" or "update library" command?
Thanks & Regards
Paul
Paul Dudley
IT Operations
ANL Container Line
pdudley AT anl.com DOT au
ANL DISCLAIMER
This e-mail and any file attached is confidential, and intended solely to the
named add
ressees. Any unauthorised dissemination or use is strictly prohibited. If you
received
this e-mail in error, please immediately notify the sender by return e-mail
from your s
ystem. Please do not copy, use or make reference to it for any purpose, or
disclose its
contents to any person.
|