|
Re: [ADSM-L] ANR1411W
2016-01-18 11:37:16
Hi,
Check in the act log for media errors that happened just before the
ANR1411W and note the tape drive involved for each error. If it is
always the same tape drive, then you probably have to clean or have this
drive serviced. If it happens with different drives then you probably
have problems with these tapes. In the latter, check in the volume
history for the number of reuses for these tapes.
Example of error messages to search for:
Date/Time: 2015-04-04 21:01:53
Message: ANR8944E Hardware or media error on drive DRIVE5
(/dev/lin_tape/by-id/lin_tape0440B3105) with volume AA0085(OP=WRITE,
Error Number= 5, CC=0, KEY=03, ASC=50, ASCQ=00,
SENSE=F0.00.03.00.04.00.00.58.
00.00.00.00.50.00.36.00.74.75.00.00.00.01.41.41.30.30.38.35.4C.63.00.00.75.A6.C7.00.00.01.04.C7.80.0A.50.4C.36.00.A1.B4.36.00.00.00.00.74.75.00.00.00.00.00.00.00.00.00.00.00.00.00.00.20.A0.00.00.00.80.80.00.
00.00.00.00.80.00.00.00.00.50.31.33.30.38.30.31.30.39.30,
Description=An undetermined error has occurred). Refer to the Tivoli
Storage Manager documentation on I/O error code descriptions.
(PROCESS: 16)
Date/Time: 2015-04-04 21:01:53
Message: ANR8359E Media fault detected on LTO volume AA0085 in drive
DRIVE5 (/dev/lin_tape/by-id/lin_tape0440B3105) of library ARCHIVELIB.
(PROCESS: 16)
Date/Time: 2015-04-04 21:01:53
Message: ANR1411W Access mode for volume AA0085 now set to
"read-only" due to write error. (PROCESS: 16)
Whatever the problem is connected the the drive or to the tapes, it is
important that you try to move the data from these tapes to other tapes
within the same pool with the "MOVE DATA" command. You may want to use
the option "RECONSTRUCT=NO" to speed up the transfer. If some of these
tapes are unreadable, you will have to delete these tapes with the
"DELETE VOLUME" using the option "DISCARDdata=YES". Once the tapes are
empty remove them from the library and discard them.
Hope this will help you.
Paul-André
______________________________
*Paul-André Chassé*, B. Sc.
Analyste de l'informatique - Centre de calcul scientifique (John-S.-Bourque)
Service des technologies de l'information
Université de Sherbrooke
Tél. : 819 821-8000, poste 62582
Courriel : Paul-Andre.Chasse AT USherbrooke DOT ca
Le 2016-01-18 07:47, madunix AT gmail DOT com a écrit :
Dears,
I keep getting the following message ANR1411W, using IBM TSM server 7.1
with
Product ID 3573-TL
Currently Installed Library Firmware C.80 / 3.20e
Bootcode Firmware Revision 0.80
Barcode Reader SE625
Any help to solve this issue.....
01/13/2016 07:44:11 ANR1411W Access mode for volume SDC018L6 now set to
"read-only" due to write error. (SESSION: 99045)
01/14/2016 03:27:50 ANR1414W Volume SDC011L6 access mode is "read-only"
due to
previous write error.
01/14/2016 03:27:50 ANR1414W Volume SDC018L6 access mode is "read-only"
due to
previous write error.
01/14/2016 05:00:09 ANR1411W Access mode for volume SDC014L6 now set to
"read-only" due to write error. (SESSION: 27)
01/14/2016 17:30:01 ANR1411W Access mode for volume SDC011L6 now set to
"read-only" due to write error. (SESSION: 1448)
01/14/2016 18:43:03 ANR1411W Access mode for volume SDC004L6 now set to
"read-only" due to write error. (SESSION: 1602)
01/14/2016 18:48:09 ANR1411W Access mode for volume SDC013L6 now set to
"read-only" due to write error. (SESSION: 1602)
01/15/2016 02:59:31 ANR1411W Access mode for volume SDC014L6 now set to
"read-only" due to write error. (SESSION: 2762)
01/16/2016 06:55:13 ANR1411W Access mode for volume SDC018L6 now set to
"read-only" due to write error. (SESSION: 6684)
01/18/2016 12:19:04 ANR2017I Administrator ADMIN1 issued command: QUERY
ACTLOG
begind=tod-10 search=read-only (SESSION: 14285)
more... (<ENTER> to continue, 'C' to cancel) \
The only valid responses are characters from this set: [Enter, C]
The character '#' stands for any decimal integer.
-mad
|
|
|
