The link has these instructions for 2008 / 2012.
I use them all the time, they work. :-)
*The "DISKSHADOW Prereq Test" (Windows 2008 and 2012)*
VSS functionality can be validated with the Windows 2008 and/or Windows
2012 Server embedded command DISKSHADOW. The following are the DISKSHADOW
tests recommended before any Tivoli Storage Manager components are
installed.
1. Test Non-persistent shadow copy creation and deletion.
a. Run "diskshadow" on a command window
b. DISKSHADOW> add volume f: (Database volume)
c. DISKSHADOW> add volume g: (Log volume)
d. DISKSHADOW> create
e. DISKSHADOW>list shadows all (This may take a few minutes)
f. DISKSHADOW>delete shadows all
Note: Volumes f: and g: represent the Exchange Database and log volumes.
Repeat this 4 times. Verify the Windows Event Log contains no errors.
2. Test Persistent shadow copy creation and deletion.
a. Run "diskshadow" on a command window
b. DISKSHADOW>set context persistent
c. DISKSHADOW> add volume f: (Database volume)
d. DISKSHADOW> add volume g: (Log volume)
e. DISKSHADOW> create
f. DISKSHADOW>list shadows all (This may take a few minutes)
g. DISKSHADOW>delete shadows all
Note: Volumes f: and g: represent the Exchange Database and log volumes.
Repeat this 4 times. Verify the Windows Event Log contains no errors.
3. Test Non-persistent transportable shadow copy creation and deletion
a. Run "diskshadow" on a command window
b. DISKSHADOW>set context persistent
c. DISKSHADOW>set option transportable
d. DISKSHADOW>begin backup
e. DISKSHADOW> add volume f: (Database volume)
f. DISKSHADOW> add volume g: (Log volume)
g. DISKSHADOW>set metadata c:\metadata\exchangemeta.cab (specify the path
where you want the metadata stored)
h. DISKSHADOW> create
i. DISKSHADOW>end backup
j. Manually copy the exchangemeta.cab file from the source server to the
offload server and run these two commands:
DISKSHADOW>LOAD METADATA <path to>exchangemeta.cab
DISKSHADOW>IMPORT
k. DISKSHADOW>list shadows all (This may take a few minutes)
l. DISKSHADOW>delete shadows all
On Wed, Sep 9, 2015 at 5:03 PM, Lee, Gary <glee AT bsu DOT edu> wrote:
> Great for 2003, but as stated, this is a win 2008-r2/64 machine.
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> Stefan Folkerts
> Sent: Wednesday, September 09, 2015 9:12 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] vss errors on tsm backup
>
> I would run this for the c: drive:
>
> Here is the VSHADOW pre-testing that is recommended BEFORE Tivoli Storage
> Manager is even installed:
>
> *The "VSHADOW Prereq Test" (Windows 2003)*
>
> 1. Test non-persistent shadow copy creation and deletion.
> Run "VSHADOW k: l:“ (where k: and l: are the Exchange Server database
> and log volumes).
> Repeat this 4 times.
> Check the Windows Event Log to check to make sure things look good.
> 2. Test persistent shadow copy creation and deletion.
> Run "VSHADOW -p k: l:“ (where k: and l: are the Exchange Server database
> and log volumes).
> You may need to run "VSHADOW -da" to remove this if you don't have
> enough space.
> Repeat this 4 times.
> Check the Windows Event Log to check to make sure things look good.
> 3. Note: This test is for VSS Hardware Provider environments only.
> Test non-persistent transportable shadow copy creation and deletion (VSS
> Hardware Provider environments only).
> Run "VSHADOW -t=export.xml k: l:“ (where k: and l: are the Exchange
> Server database and log volumes).
> On the machine you have set aside for offload, run "VSHADOW
> -i=export.xml“.
> Check the Windows Event Log to check to make sure things look good.
>
>
> Once all of these things are working perfectly, you are ready for the
> Tivoli Storage Manager code to be installed and tested.
>
> it's from : https://www-304.ibm.com/support/docview.wss?uid=swg21403456
>
> You most likely have a VSS error that the TSM client can't work around, it
> needs to be fixed first, be sure to install all 2003 the hotfixes for VSS.
>
>
> On Wed, Sep 9, 2015 at 3:04 PM, Lee, Gary <glee AT bsu DOT edu> wrote:
>
> > Client machine running win 2008-r2 64 bit under hyper-v.
> > Tsm client 6.4.2.
> >
> > Several errors all related to vss. Extract from dsmerror.log follows.
> >
> > 09/09/2015 06:30:20 ANS5250E An unexpected error was encountered.
> > TSM function name : AddToSnapshotSet
> > TSM function : 'AddToSnapshotSet failed with error
> > VSS_E_UNEXPECTED_PROVIDER_ERROR. 0X8004230F'
> > TSM return code : -2147212529
> > TSM file : ..\..\common\winnt\asrutil.cpp (2281)
> > 09/09/2015 06:30:20 ANS5250E An unexpected error was encountered.
> > TSM function name : AddToSnapshotSet
> > TSM function : 'AddToSnapshotSet failed with error
> > VSS_E_UNEXPECTED_PROVIDER_ERROR. 0X8004230F'
> > TSM return code : -2147212529
> > TSM file : ..\..\common\winnt\asrutil.cpp (2281)
> > 09/09/2015 06:30:21 ANS5250E An unexpected error was encountered.
> > TSM function name : BackupComplete()
> > TSM function : 'BackupComplete() failed with error
> > VSS_E_BAD_STATE. 0X80042301'
> > TSM return code : -2147212543
> > TSM file : ..\..\common\winnt\asrutil.cpp (2493)
> > 09/09/2015 06:30:21 ANS1468E Backing up Automated System Recovery (ASR)
> > files failed. No files will be backed up.
> >
> > 09/09/2015 06:30:22 ANS1327W The snapshot operation for 'C:' failed with
> > error code: -1.
> > 09/09/2015 06:30:22 ANS5250E An unexpected error was encountered.
> > TSM function name : BaStartSnapshot
> > TSM function : initializeSnapshotSet() failed, check Microsoft
> > Application event log for VSS errors
> > TSM return code : -1
> > TSM file : ..\..\common\ba\backsnap.cpp (6368)
> > 09/09/2015 06:30:22 ANS5258E Microsoft volume shadow copy snapshot
> > initialization failed.
> > 09/09/2015 06:30:22 ANS5283E The operation was unsuccessful.
> > 09/09/2015 06:30:22 ANS1377W The client was unable to obtain a snapshot
> of
> > '\\libmysql\c$'. The operation will continue without snapshot support.
> >
> > Not sure where to go from here. Many articles on the web about win 2003,
> > haven't found much for this.
> >
>
|
