Hi Jeannie,
 Would trying search=bulk make a difference?


label libv XXX search=b checkin=scr labels=b overwrite=y waitt=0



On Tue, Dec 23, 2014 at 7:39 AM, Jeanne Bruno <JBruno AT cenhud DOT com> wrote:

> Hello.  We are using TSM manager 6.3.3.0.
> Tape Library is a DS3512.
> I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB).
> On the DS3512, I choos the library and insert the tape into the machine.
> On the command line I use this command:
>
> label libv xxxxxx search=yes checkin=scratch labels=b overwrite=y
>
> My output is this:
>
> ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME xxxx
> search=yes checkin=scratch labels=b overwrite=y
> ANR0984I Process 120 for LABEL LIBVOLUME started in the BACKGROUND at
> 09:29:14.
> ANR8799I LABEL LIBVOLUME: Operation for library XXXXXX started as process
> 120.
> ANR8801I LABEL LIBVOLUME process 120 for library XXXXXX completed; 0
> volume(s) labeled, 0 volume(s) checked-in.
> ANR0985I Process 120 for LABEL LIBVOLUME running in the BACKGROUND
> completed with completion state SUCCESS at 09:29:19.
>
> 0 volumes, but finished successfully and when I query the library XXXXXX,
> the new tape does not show in the list.
>
> I have also tried this command:
> CHECKIN LIBVOLUME xxxxxx SEARCH=YES CHECKLABEL=YES status=scratch
> WAITTIME=0 VOLLIST=A00xxxxL5.
> Results are the same.
>
> I have also tried putting the tapes on the door of the machine and not
> doing the 'insert media'...again results on the same.
> We just received 30 new tapes last week and I've tried about 10 of them so
> far.
> I have used the cleaning tape and did the clean process and also rebooted
> the DS3512.....same results afterwards.
>
> Any help, suggestions would be greatly appreciated.
>
>
>
> ____________________
> Jeannie Bruno
> Senior Systems Analyst
> jbruno AT cenhud DOT com<mailto:jbruno AT cenhud DOT com>
> Central Hudson Gas & Electric
> (845) 486-5780
>