Re: [ADSM-L] TSM 7.1 usage of volumes for dedupe
2014-10-22 14:00:05
hi Martha,
See if this can apply :
www-01.ibm.com/support/docview.wss?uid=swg21685554
Note that I had a situation where Q CONT returned that the volume was empty but
it wasn't in reality since it was impossible to delete it (without discrading
data). A select statement against the contents showed some files. Unforunately,
I don't know how this story finished...
--
Best regards / Cordialement / مع تحياتي
Erwann SIMON
----- Mail original -----
De: "Martha M McConaghy" <martha.mcconaghy AT MARIST DOT EDU>
À: ADSM-L AT VM.MARIST DOT EDU
Envoyé: Mercredi 22 Octobre 2014 17:47:14
Objet: [ADSM-L] TSM 7.1 usage of volumes for dedupe
We just installed TSM 7.1 during the summer and have been working on
migrating our backups over from our old v5.5 system. We are using
deduplication for our main storage pool and it seems to work great.
However, I'm concerned about how it is using the "volumes" in the
storage pool. Since we never ran v6, I don't know if this is "normal"
or if we have stumbled upon a bug in 7.1. So, I figured I'd ask on the
list and see if any of you have some insight.
Our dedupe storage pool is dev class FILE, of course. It is set up to
acquire new scratch "volumes" as it needs over time. Originally, I had
the max scratch vols allowed at 999, which seemed reasonable. After
about a month, though, we hit that max and I had to keep raising it.
When I query the volumes belonging to this pool, I see many, many of
them in full status, with pct util=0:
Volume Name Storage Device
Estimated Pct Volume
Pool Name Class
Name Capacity Util Status
------------------------ -----------
---------- --------- ----- --------
/data0/00000B55.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000B8F.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000BCF.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000BD6.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C16.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C2A.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C63.BFS DEDUPEPOOL FILE 49.9
G 100.0 Full
/data0/00000C72.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C79.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C84.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C8C.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C93.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000C9A.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000CA1.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
/data0/00000CB3.BFS DEDUPEPOOL FILE 50.0
G 0.0 Full
Literally, hundreds of them. I run reclamations, but these volumes
never get touched nor reclaimed. Seems to me that they should. I've
gone over the admin guide several times, but have found nothing touching
on this. We just applied the 7.1.1.0 updates, but that has not helped
either. If I do a move data on each, they will disappear. However,
more will return to take their place. Anyone seen this before, or have
any suggestions?
Martha
--
Martha McConaghy
Marist: System Architect/Technical Lead
SHARE: Director of Operations
Marist College IT
Poughkeepsie, NY 12601
|
|
|