[ADSM-L] San question on Lanfree backup
2013-09-24 13:18:14
Hi to all
Hi have two exchange node I backup with lanfree version 6.3.4 , the
configuration are correct success to backup them with lanfree
TSM server version 6.3.4
TDP for Exchange version 6.4.1
For Node ExchsrvAn_SA: (Incr backup)
09/24/2013 19:26:00 ANE4971I (Session: 5707, Node: EXCHSRVAN_DB) LanFree
data bytes: 19.41 GB (SESSION: 5707)
For Node ExchsrvBn_SA: (Incr backup)
09/24/2013 20:16:00 ANE4971I (Session: 5803, Node: EXCHSRVBN_DB) LanFree
data bytes: 23.51 GB (SESSION: 5803)
I have sandiscovery on both dsmsta.opt
I run on each server Q SAN , on ExchsrvAn_SA I see the correct output . 10
virtual drives from DataDomain and 2 physical LTO5 drives + Changer.
But on ExchsrvBn_SA I see only the 2 physical LTO5 drives + Changer and do not
see the virtual drives !!
As I said when running a backup on ExchsrvB I see the correct drives mounted
on the correct paths define !
Here the output’s
tsm: ADSM2>exchsrvan_sa:q san
ANR1699I Resolved EXCHSRVAN_SA to 1 server(s) - issuing command Q SAN against
server(s).
ANR1687I Output for command 'Q SAN' issued against server EXCHSRVAN_SA follows:
Device Vendor Product Serial Number Device
Type
-------- -------- ---------------- ----------------------
--------------------
DRIVE IBM ULTRIUM-TD3 G030260041 Tape0
DRIVE IBM ULTRIUM-TD3 G030260044 Tape1
DRIVE IBM ULTRIUM-TD3 G030260046 Tape2
DRIVE IBM ULTRIUM-TD3 G030260047 Tape3
DRIVE IBM ULTRIUM-TD3 G03026005B Tape4
DRIVE IBM ULTRIUM-TD3 G03026005C Tape5
DRIVE IBM ULTRIUM-TD3 G03026005D Tape6
DRIVE IBM ULTRIUM-TD3 G03026005E Tape7
DRIVE IBM ULTRIUM-TD3 G03026005F Tape8
DRIVE IBM ULTRIUM-TD3 G030260060 Tape9
DRIVE IBM ULT3580-HH5 1068090833 Tape10
LIBRARY IBM 3573-TL 00L4U78T4363_LL0
Changer0
DRIVE IBM ULT3580-HH5 1068090782 Tape11
ANR1688I Output for command 'Q SAN' issued against server EXCHSRVAN_SA
completed.
ANR1694I Server EXCHSRVAN_SA processed command 'Q SAN' and completed
successfully.
ANR1697I Command 'Q SAN' processed by 1 server(s): 1 successful, 0 with
warnings, and 0 with errors.
tsm: ADSM2>exchsrvbn_sa:q san
ANR1699I Resolved EXCHSRVBN_SA to 1 server(s) - issuing command Q SAN against
server(s).
ANR1687I Output for command 'Q SAN' issued against server EXCHSRVBN_SA follows:
Device Vendor Product Serial Number Device
Type
-------- -------- ---------------- ----------------------
--------------------
DRIVE IBM ULT3580-HH5 1068090833 Tape10
LIBRARY IBM 3573-TL 00L4U78T4363_LL0
Changer0
DRIVE IBM ULT3580-HH5 1068090782 Tape11
ANR1688I Output for command 'Q SAN' issued against server EXCHSRVBN_SA
completed.
ANR1694I Server EXCHSRVBN_SA processed command 'Q SAN' and completed
successfully.
ANR1697I Command 'Q SAN' processed by 1 server(s): 1 successful, 0 with
warnings, and 0 with errors.
I miss something ? any ideas ?
Best Regards
Robert
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [ADSM-L] San question on Lanfree backup,
Robert Ouzen <=
|
|
|