Hi Eric,
you should leave this to the profs :) Nothing that can't be fixed, I'm sure.
Been there, done that ;-) It is a bit of work and well, I'd be happy to help
you out....
Op 16 jul. 2013, om 22:58 heeft "Loon, EJ van - SPLXM" <Eric-van.Loon AT KLM
DOT COM> het volgende geschreven:
> Hi Erwann,
> Thank you VERY much for the link to the document!
> In my case it's probably a mix of one and two. I'm installing an
> active-active cluster, so two servers with their own (shared) instance dir,
> so I guess this also requires both instances to be configured on both
> nodes... In that case I'm stuck again because of the error down below.
> Tomorrow I will try if option one works. Thanks again!
> Kind regards, Eric van Loon
>
> Hi Eric,
>
> You may see this technote instead which is more recent and more complete :
> http://www-01.ibm.com/support/docview.wss?uid=swg27036658
>
> See the difference between configuring Tivoli Storage Manager server on a
> secondary node for PowerHA with a shared DB2 instance (probably your case)
> and configuring Tivoli Storage Manager server on a secondary node for PowerHA
> with a separate DB2 instance (what I used to do).
>
> In the first case there is only one DB2 instance, and it is located on shared
> disk. In the second case, there is one instance per cluster node, on
> local/non-shared disk.
>
> --
> Best regards / Cordialement / ?? ??????
> Erwann SIMON
>
> ----- Mail original -----
> De: "EJ van Loon - SPLXM" <Eric-van.Loon AT KLM DOT COM>
> À: ADSM-L AT VM.MARIST DOT EDU
> Envoyé: Mardi 16 Juillet 2013 17:09:57
> Objet: [ADSM-L] Problems creating instance on stand-by node
>
> Hi TSM-ers!
>
> I installed the TSM 6.2.5.0 server code on two AIX nodes in a PowerHA
> cluster. Both TSM instances are running fine on their own default node.
> Now I'm trying to make the TSM servers HA ready by registering the DB2
> instance op the stand-by node, using the db2icrt command. I'm using
> technote 1452772 as reference, since the installation guide seems to be
> incomplete.
>
> A failover was performed and according to the instructions I now have to
> create the empty DB2 instance on the stand-by node by issuing the
> following command:
>
>
>
> /opt/tivoli/tsm/db2/instance/db2icrt -u tsm_abu2 tsm_abu2
>
>
>
> This however results in the following error:
>
>
>
> DBI1082E The file or directory /appl/tsm_abu2/sqllib already exists
>
>
>
> Of course this directory exists: it was created during the initial
> creation of the instance on the primary node!
>
> Could you please help me in solving this problem?
>
> Thank you very much for your help!
>
> Kind regards,
>
> Eric van Loon
>
> ********************************************************
> For information, services and offers, please visit our web site:
> http://www.klm.com. This e-mail and any attachment may contain confidential
> and privileged material intended for the addressee only. If you are not the
> addressee, you are notified that no part of the e-mail or any attachment may
> be disclosed, copied or distributed, and that any other action related to
> this e-mail or attachment is strictly prohibited, and may be unlawful. If you
> have received this e-mail by error, please notify the sender immediately by
> return e-mail, and delete this message.
>
> Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
> employees shall not be liable for the incorrect or incomplete transmission of
> this e-mail or any attachments, nor responsible for any delay in receipt.
> Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
> Airlines) is registered in Amstelveen, The Netherlands, with registered
> number 33014286
> ********************************************************
>
>
> ********************************************************
> For information, services and offers, please visit our web site:
> http://www.klm.com. This e-mail and any attachment may contain confidential
> and privileged material intended for the addressee only. If you are not the
> addressee, you are notified that no part of the e-mail or any attachment may
> be disclosed, copied or distributed, and that any other action related to
> this e-mail or attachment is strictly prohibited, and may be unlawful. If you
> have received this e-mail by error, please notify the sender immediately by
> return e-mail, and delete this message.
>
> Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its
> employees shall not be liable for the incorrect or incomplete transmission of
> this e-mail or any attachments, nor responsible for any delay in receipt.
> Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch
> Airlines) is registered in Amstelveen, The Netherlands, with registered
> number 33014286
> ********************************************************
>
--
Met vriendelijke groeten/Kind Regards,
Remco Post
r.post AT plcs DOT nl
+31 6 248 21 622
--
Met vriendelijke groeten/Kind Regards,
Remco Post
r.post AT plcs DOT nl
+31 6 248 21 622
|