Re: [ADSM-L] Now that I have a TS3500 - I have questions
1. I would check the Cartridge Assignment Policy on the library and make sure
the serial numbers are defined for the correct library.
2. checkin libv <library> search=b checkl=b status=
>>> Zoltan Forray <zforray AT VCU DOT EDU> 5/28/2013 9:15 AM >>>
Our new TS3500 was installed this weekend (replacing our 17-year old 3494)
and I have lots of questions about how things should be done/configured and
why it is doing what it is doing.
First off, the library is configured as 2-virtual librarys, each side with
fixed drive assignments and each side managed by a separate TSM server.
1. Per other discussions, I configured 255 "Virtual IO". We also
configured/enabled "Insert Notification". However, some tapes keep being
inserted "unassigned" while most are properly assigned to the right
2. What is the proper CHECKIN command options for doing mass checkins from
the IO/VIO slots? SEARCH=BULK or SEARCH=YES - CHECKLABEL=YES or
CHECKLABEL=BARCODE? The book says for a SCSI library you can't specify
SEARCH=YES and CHECKLABEL=NO....
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zforray AT vcu DOT edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details