Re: [ADSM-L] ADSM-L Digest - 2 Oct 2012 to 3 Oct 2012 (#2012-229)
2012-10-04 08:11:51
Unfortunately I had already removed the replicated nodes on both servers and it
still won't let me delete it.
John
Hi John
About the second part of your message, ANR1633E REMOVE NODE: Node NODENAME is
set up for replication and cannot be renamed or removed.".
You need first to remove the REPLNODE: remove replnode NODENAME from both
servers (source and target)
Before you can remove the node
Regards Robert
------------------------------
Date: Wed, 3 Oct 2012 17:34:22 -0400
From: "Dury, John C." <JDury AT DUQLIGHT DOT COM>
Subject: define server for replication
We have 2 datacenters and plan on having a tsm server at each site. Every c=
lient will backup all o the nodes at that site to the tsm server at that si= te
and then replicate their data to the server at the other site. Both serv= ers
are running tsm 6.3.2. One is aix and one is linux. The linux server is= brand
new and was just built. The aix server has been around seemingly for= ever and
is currently backing up nodes from both sites.
I've read through the manual on replication and believe I understand how it=
works. Just as a test, I successfully defined both servers to each other a= nd
successfully replicated one small node from one server to the other.
For whatever reason, the servers stopped taking to each other (I can't find=
any reason anywhere) so I decided I would delete the replicated node on bo= th
servers and also delete each server from the other and redefine them.
When I try "def server <2ndserver> serverpassword=3D<serverpassword> hladdr=
ess=3D2ndserver.blah.blah lladdress=3D1500" (with correct values of course)= ,
it works successfully but when I try "ping server 2ndserver" it always fa= ils
with "ANR4373E Session rejected by target server 2ndserver, reason:
Authenticati= on Failure."
I've tried making sure that all of the below were done on both servers:
set serverhladdress
set serverlladdress
set serverpassword
and tried with both crossdefine on and crossdefine off.
I can't find any logic as to why this doesn't work when I know for a fact i= t
worked previously. There are no nodes type=3Dserver defined on either tsm=
server. The userid I am using to do the command is the same on both server= s
and has the same password although I don't think that matters. Both serv= ers
have nothing currently set for target replication server.
The replicated node I used for testing is also still defined on the target =
server and I can't delete it either because it says "ANR1633E REMOVE NODE: =
Node NODENAME is set up for replication and cannot be renamed or removed.".=
The replication settings on the replicated node on the target server are r=
eplstate=3Ddisabled replmode=3Dreceive. I can't change the replmode no matt= er
what either.
Is anyone else successfully using replication? It worked once and hasn't si=
nce and now as I am trying to set it all up again as if from scratch, I can= 't
even get the two servers to talk anymore.
Help!
------------------------------
End of ADSM-L Digest - 2 Oct 2012 to 3 Oct 2012 (#2012-229)
***********************************************************
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- Re: [ADSM-L] ADSM-L Digest - 2 Oct 2012 to 3 Oct 2012 (#2012-229),
Dury, John C. <=
|
|
|