ADSM-L

[ADSM-L] Configuring tape library on centOS

2010-07-06 21:50:32
Subject: [ADSM-L] Configuring tape library on centOS
From: Mario Behring <mariobehring AT YAHOO DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 6 Jul 2010 18:49:01 -0700
Hi list,

I have installed a TSM 5.5 server on a CentOS 5.4 server and I am having a hard
time configuring the Tape Library using the TSM Device Driver
(tsmscsi)...despite having done this a thousand times...

This is what the /proc/scsi/scsi brings:

Attached devices:
>Host: scsi1 Channel: 00 Id: 00 Lun: 00
>  Vendor: IBM-ESXS Model: DTN036C3UCDY10FN Rev: S27P
>  Type:   Direct-Access                    ANSI SCSI revision: 03
>Host: scsi1 Channel: 00 Id: 01 Lun: 00
>  Vendor: IBM-ESXS Model: CBR073C32410ESFN Rev: DFQD
>  Type:   Direct-Access                    ANSI SCSI revision: 04
>Host: scsi1 Channel: 00 Id: 02 Lun: 00
>  Vendor: LSILOGIC Model: 1030 IM       IM Rev: 1000
>  Type:   Direct-Access                    ANSI SCSI revision: 02
>Host: scsi1 Channel: 00 Id: 04 Lun: 00
>  Vendor: IBM-ESXS Model: MAX3147NC     FN Rev: CA06
>  Type:   Direct-Access                    ANSI SCSI revision: 04
>Host: scsi1 Channel: 00 Id: 08 Lun: 00
>  Vendor: IBM      Model: 32P0032a S320  1 Rev: 1
>  Type:   Processor                        ANSI SCSI revision: 02
>Host: scsi1 Channel: 01 Id: 02 Lun: 00
>  Vendor: IBM-ESXS Model: DTN146C3UCDY10FN Rev: S27P
>  Type:   Direct-Access                    ANSI SCSI revision: 03
>Host: scsi1 Channel: 01 Id: 03 Lun: 00
>  Vendor: IBM-ESXS Model: DTN146C3UCDY10FN Rev: S27P
>  Type:   Direct-Access                    ANSI SCSI revision: 03
>Host: scsi2 Channel: 00 Id: 02 Lun: 00
>  Vendor: IBM      Model: ULT3580-TD2      Rev: 73V1
>  Type:   Sequential-Access                ANSI SCSI revision: 03
>Host: scsi2 Channel: 00 Id: 03 Lun: 00
>  Vendor: IBM      Model: ULT3580-TD2      Rev: 73V1
>  Type:   Sequential-Access                ANSI SCSI revision: 03
>Host: scsi2 Channel: 00 Id: 03 Lun: 01
>  Vendor: IBM      Model: ULT3582-TL       Rev: 310B
>  Type:   Medium Changer                   ANSI SCSI revision: 02


Considering the output above...what should I be putting on the lb.conf and
mt.conf files? I tried the configuration below but the tsmscsi script did not
recognize the library...

lb.conf
>HOST[0]=2
>CHANNEL[0]=0
>ID[0]=3
>LUN[0]=1
>
>
>mt.conf
>HOST[0]=0
>CHANNEL[0]=0
>ID[0]=2
>LUN[0]=0
>
>
>HOST[1]=0
>CHANNEL[1]=0
>ID[1]=3
>LUN[1]=0



Thanks

Mario

<Prev in Thread] Current Thread [Next in Thread>