ADSM-L

Re: [ADSM-L] 3592JB tapes

2010-06-08 15:41:24
Subject: Re: [ADSM-L] 3592JB tapes
From: "Huebner,Andy,FORT WORTH,IT" <Andy.Huebner AT ALCONLABS DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 8 Jun 2010 14:40:08 -0500
What kind of data?  We are getting 750GB - 1.2TB on each tape.  The compression 
is similar to what the original file servers got when they wrote to a different 
library and different drives.

Andy Huebner

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Sheppard, Sam
Sent: Tuesday, June 08, 2010 1:20 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] 3592JB tapes

We have just purchased a bunch of 3592JB tapes (700GB uncompressed capacity) to 
use for some large NDMP backups. My first test last night backing up around 
1.8TB of data completely filled two of these tapes. This is only marginally 
better than what I was getting on the 3592JA tapes which are rated at 300GB 
uncompressed.  We have 8 TS1120 (3592-E05) drives in a 3494 library and are 
running TSM 6.1.3.4.  The device class specifies FORMAT=DRIVE which should 
cause recording at the highest available density. I would think almost all of 
this data would fit on one of these volumes.  Any ideas where I am going wrong?

Thanks
Sam Sheppard
San Diego Data Processing Corp.
(858)-581-9668

This e-mail (including any attachments) is confidential and may be legally 
privileged. If you are not an intended recipient or an authorized 
representative of an intended recipient, you are prohibited from using, copying 
or distributing the information in this e-mail or its attachments. If you have 
received this e-mail in error, please notify the sender immediately by return 
e-mail and delete all copies of this message and any attachments.

Thank you.

<Prev in Thread] Current Thread [Next in Thread>