Re: [ADSM-L] LTO2s not mounting in LTO4 drives
2010-05-17 15:12:50
On May 17, 2010, at 1:01 PM, Howard Coles wrote:
> Well, Ladies and Gents I have found a solution. I opened a PMR with IBM, and
> they found (after we went through all the queries you can think of) this
> technote:
> "http://www-01.ibm.com/support/docview.wss?rs=663&context=SSGSG7&uid=swg21269453&loc=en_US&cs=UTF-8&lang=en".
>
> In it, it says to set all volumes to read-only (which will work if you have
> all the storage pools set to read only that use LTO2 tapes), and update your
> device class and set "format=drive". Once I did the last part (all the
> storage pools were already set) TSM loaded up an LTO2 and started moving data.
Howard,
That's the Technote I told you about yesterday afternoon
(http://www.mail-archive.com/adsm-l AT vm.marist DOT edu/msg86356.html), which
I had found quickly.
Richard Sims, apparently wasting his time in Boston
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [ADSM-L] LTO2s not mounting in LTO4 drives, Howard Coles
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives, Richard Sims
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives, Howard Coles
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives, Len Boyle
- [ADSM-L] unsubscribe, Dat Vo
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives, Michael Green
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives, Howard Coles
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives,
Richard Sims <=
- Re: [ADSM-L] LTO2s not mounting in LTO4 drives, Howard Coles
- [ADSM-L] Data conversion Unix-Windows issue, Strand, Neil B.
- Re: [ADSM-L] Data conversion Unix-Windows issue, Robert Clark
- Re: [ADSM-L] Data conversion Unix-Windows issue, Prather, Wanda
- Re: [ADSM-L] Data conversion Unix-Windows issue, Prather, Wanda
[ADSM-L] AW: [ADSM-L] LTO2s not mounting in LTO4 drives, Bruno Friess
|
|
|