Re: [ADSM-L] ANR8302E I/O error
2010-02-26 11:59:12
Hi Fred,
I´ve checked the codes on the Messages manual.....but I am not sure what does
it mean anyway....
I was performing a MOVE DATA and TSM is putting the source tape at DRIVE02 and
the destination tape at DRIVE01.....which is the one with this error....
Mario
________________________________
From: Fred Johanson <Fred AT UCHICAGO DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Fri, February 26, 2010 1:45:36 PM
Subject: Re: ANR8302E I/O error
The code means :Media Removal Prevented".
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT vm.marist DOT edu] On Behalf Of
Mario Behring
Sent: Friday, February 26, 2010 10:33 AM
To: ADSM-L AT vm.marist DOT edu
Subject: [ADSM-L] ANR8302E I/O error
Hi list,
I am getting the following error on one of my drives when performing a MOVE
DATA:
ANR8302E I/O error on drive DRIVE01 (MT4.0.0.3) with
volume (OP=OFFL, Error Number=1, CC=0, rc = 1, KEY=05,
ASC=53, ASCQ=02, SENSE=70.00.05.00.00.00.00.58.00.00.00.-
00.53.02.30.00.2C.19.00.00.00.01.32.30.30.30.32.36.4C.00-
.00.00.00.00.04.00.00.00.00.04.81.1B.60.00.00.00.00.00.0-
5.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.30.38.39.4C.31.31.33.39.37, Description=An undetermined
error has occurred). Refer to Appendix C in the
'Messages' manual for recommended action. (SESSION: 1,
PROCESS: 2)
This is an IBM 3573-TL library with 2 IBM ULT3580-TD4 drives. The error occurs
only on one drive....problem is I´ve changed the drives already........TSM is
5.5.4.0 running on a Windows box.
Any help is appreciated.
Mario
|
|
|