Re: [ADSM-L] ANR9999D error - need to extend LOG

You will need to do a stand-alone log extension. Use dsmfmt -log ...etc
followed by a dsmserv extend log ....etc. - see the admin ref appendix for a
stand-alone log extension. after that, start the server - suggest in an os
prompt so that you can see the messages. once you're up, reduce log by your
extension and then remove the volume you added with the dsmserv extend log.
Remember in v5 the maximum log size is 13GB, so you want to be at about
10GB. If you have maxed out the log and you cannot do a dsmserv extend log,
you'll have to do a point in time restore of the database.

Joerg Pohlmann
250-245-9863


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Mario Behring
Sent: Friday, August 21, 2009 10:00
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] ANR9999D error - need to extend LOG

Sorry all...I didn´t make myself clear....there is no TSM command line at
this point....after the error message, the server shuts down and return to
OS prompt.

Mario




________________________________
From: Gary Bowers <gbowers AT ITRUS DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Friday, August 21, 2009 1:30:24 PM
Subject: Re: ANR9999D error - need to extend LOG

>From the tsm command line:

def dbvol <Vol_name> formatsize=<size>

Gary
Itrus Technologies

On Aug 21, 2009, at 11:03 AM, Mario Behring wrote:

> Hi list,
> 
> I have a TSM 5.5 running on a Windows 2003 box.
> 
> Recovery log is full and I am getting the following message at startup:
> 
> ANR1635I The server machine GUID,
52.1c.f3.41.5e.70.11.dd.8e.7d.00.0e.0c.64.ba.74, has initialized.A
> NR2997W The server log is 99 percent full. The server will delay
transactions by 300 milliseconds.
> ANR9999D_2860420907 (adminit.c:1597) Thread<0>: Insufficient log space to
update table Administrat-
> ive.Attributes.
> ANR9999D Thread<0> issued message 9999 from:
> ANR9999D Thread<0>  10646B52 OutDiagToCons()+e2
> ANR9999D Thread<0>  10640CD8 outDiagf()+98
> ANR9999D Thread<0>  10065235 admInitPart2()+2075
> ANR9999D Thread<0>  2E74696E Unknown
> 
> 
> I am trying to extend the LOG using the DSMSERV EXTEND LOG command, but I
need to create the volume previous to running this command. On Unix/Linux I
would use the DSMFMT command, but I can´t find this utility anywhere on the
TSM Windows server...
> 
> Is it missing or it doesn´t exist? If so, how can I create a volume so I
can extend the LOG? I tried DSMSERV FORMAT, but looks like this command is
only for fresh installations, as it obligates me to create a DB as well...
> 
> Any help is appreciated.
> 
> Mario
> 
> 
> 
>