I can't remember now, I just remember not being able to specify an options file
without using the set dsm_config line in a batch file.
According to the manual the only options it took were userid, password and a
command I think. But
See Ya'
Howard
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Henrik Vahlstedt
> Sent: Tuesday, March 10, 2009 10:28 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] SV: multiple schedules on one server
>
> "dsmadmc is the one that used to not allow any other command line
> options but userid and password"
>
> Are you sure that TSM started to use TcpServer and TcpPort options in
> 5.2....?? (-tcps=,-tcpp=)
>
>
> //Henrik
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Howard Coles
> Sent: den 10 mars 2009 16:01
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] SV: multiple schedules on one server
>
> Yea, I did some testing with that yesterday. I'm so used to the older
> versions of the Admin session commandline's limitations that I forgot
> about that part. Sorry.
>
> The dsmadmc is the one that used to not allow any other command line
> options but userid and password. I used it so much in the 5.2 days I
> never went back and checked. DOH!
>
> I stand corrected.
>
> See Ya'
> Howard
>
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> > Of Christian Svensson
> > Sent: Monday, March 09, 2009 4:53 PM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: [ADSM-L] SV: multiple schedules on one server
> >
> > Hi,
> > Howard, you can use -optfile=C:\location\dsm.opt in Windows but you
> > can't use -servername=Instance_name in Windows.
> >
> > Joe, what you can do to make sure your users can't access other
> > peoples data is by change the security on DSM.OPT, and put dsm.opt in
> > their directory with ReadOnly access.
> > Now should you be able to run dsm.exe
> > -optfile=D:\Users\Company\dsm.opt and also have put your security to
> a higher level.
> >
> > Best Regards
> > Christian Svensson
> >
> > Cell: +46-70-325 1577
> > E-mail: Christian.Svensson AT cristie DOT se
> > Skype: cristie.christian.svensson
> > ________________________________________
> > Från: ADSM: Dist Stor Manager [ADSM-L AT VM.MARIST DOT EDU] för Howard
> > Coles [Howard.Coles AT ARDENTHEALTH DOT COM]
> > Skickat: den 9 mars 2009 20:23
> > Till: ADSM-L AT VM.MARIST DOT EDU
> > Ämne: Re: multiple schedules on one server
> >
> > No, that won't work on a Windows Client.
> >
> > You have to do the following in a batch file:
> >
> > Set dsm_config=c:\location\of\dsm.opt
> > dsm
> >
> > The reason being, the Windows client doesn't take the same arguments
> > as the *NIX clients.
> >
> > See Ya'
> > Howard
> >
> >
> > > -----Original Message-----
> > > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> > > Behalf Of Joe Crnjanski
> > > Sent: Monday, March 09, 2009 1:55 PM
> > > To: ADSM-L AT VM.MARIST DOT EDU
> > > Subject: Re: [ADSM-L] multiple schedules on one server
> > >
> > > Sorry I didn't mentioned; it is Windows client.
> > >
> > > So I guess I can create batch file backup1.cmd and put one line
> > inside:
> > > dsm -optfile=/location/of/dsm1.opt
> > >
> > > and than another batch file backup2.cmd with content:
> > > dsm -optfile=/location/of/dsm2.opt
> > >
> > > etc,etc It sounds like it will work. I will try and let you know.
> > >
> > >
> > > Joe Crnjanski
> > > Infinity Network Solutions Inc.
> > > Phone: 416-235-0931 x226
> > > Fax: 416-235-0265
> > > Web: www.infinitynetwork.com
> > >
> > >
> > > -----Original Message-----
> > > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> > > Behalf Of Zoltan Forray/AC/VCU
> > > Sent: Monday, March 09, 2009 2:39 PM
> > > To: ADSM-L AT VM.MARIST DOT EDU
> > > Subject: Re: multiple schedules on one server
> > >
> > > You did not say what platform/OS but assume Windoze from your GUI
> > > reference.
> > >
> > > I have multiple-schedules/instances on Solaris and Netware servers
> > > doing just what you are trying to do. Each uses different WEBPORTS
> > > and the DSMCAD java-based "GUI" to control
> > >
> > > Windows is more complicated in setting up multiple scheduler
> > services.
> > > My
> > > windows guy says he doesn't use the GUI on a multi-instance server,
> > > unless he manually changes the dsm.opt file since he doesn't use
> the
> > > java/dsmcad piece.
> > >
> > >
> > >
> > >
> > > Joe Crnjanski <JCrnjanski AT INFINITYNETWORK DOT COM> Sent by: "ADSM: Dist
> > > Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> > > 03/09/2009 02:13 PM
> > > Please respond to
> > > "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> > >
> > >
> > > To
> > > ADSM-L AT VM.MARIST DOT EDU
> > > cc
> > >
> > > Subject
> > > [ADSM-L] multiple schedules on one server
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Hello,
> > >
> > >
> > >
> > > We have customer who is hosting multiple clients on his server. He
> > > wants to backup different folders (that belong to different
> > > customers) with different TSM node name, and he also wants his
> > > customers to be able
> > to
> > > lunch GUI and see only their files.
> > >
> > >
> > >
> > > I can install multiple schedules on his server that will use
> > different
> > > dsm.opt files, but when I lunch GUI it will always use only one
> > > dsm.opt.
> > > So I can have different nodes backing up different folders, but I
> > > cannot check it with GUI. I would need some sort of start-up switch
> > > that
> > will
> > > tell GUI which dsm.opt to use or something like this.
> > >
> > >
> > >
> > > Any ideas appreciated,
> > >
> > > Regards,
> > >
> > >
> > >
> > > Joe Crnjanski
> > >
> > > Infinity Network Solutions Inc.
> > >
> > > Phone: 416-235-0931 x226
> > >
> > > Fax: 416-235-0265
> > >
> > > Web: www.infinitynetwork.com
>
>
> -------------------------------------------------------------------
> The information contained in this message may be CONFIDENTIAL and is
> intended for the addressee only. Any unauthorised use, dissemination of
> the
> information or copying of this message is prohibited. If you are not
> the
> addressee, please notify the sender immediately by return e-mail and
> delete
> this message.
> Thank you.
|
