Re: [ADSM-L] [OFFTOPIC] Announce online generator for LTO barcode labels

Hi Lisa,

It is there : http://tapelabels.librelogiciel.com/index.html 

Cheers.

Arnaud


******************************************************************************
Panalpina Management Ltd., Basle, Switzerland,
CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH
Phone: +41 (61) 226 11 11, FAX: +41 (61) 226 17 01
Direct: +41 (61) 226 19 78
e-mail: arnaud.brion AT panalpina DOT com
******************************************************************************


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Seay, Lisa
Sent: jeudi 12 février 2009 18:06
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [OFFTOPIC] Announce online generator for LTO barcode labels

I have an old url for the generator. Would you please send me the new location. 
I would like to test it in my shop.

Respectfully,
Lisa Seay
850/487-7777 ext. 2059


  
PLEASE NOTE:  Florida has a very broad public records law.  Most written 
communications to or from state officials regarding state business are 
considered to be public records and will be made available to the public and 
the media upon request.  Your e-mail messages may, therefore, be subject to 
public disclosure.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Jerome Alet
Sent: Thursday, January 08, 2009 2:45 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] [OFFTOPIC] Announce online generator for LTO barcode 
labels

On Wed, Jan 07, 2009 at 07:40:50PM -0500, daniel996 wrote:
>

> As I am in Australia, we can't get any of the pre-sized labels your  
> utility is setup for (we can only get A4 sized media, not US).
>
> I bought Avery codde J4776, which is a single A4 heavy duty label 
> sheet and I used a guillotine to cut the labels to size.

I don't have the exact reference of the labels we used, but we were in a 
similar situation.

I've recently upgraded this generator to allow people to input a positive or 
negative offset on the X and Y axis, to workaround the fact that not all 
printers are created equal : special marks are now included in the bottom left 
with their expected size printed, so you just have to print one sheet (not 
necessarily real labels, a normal blank sheet is OK provided it's in the Letter 
format, the format used by all supported templates), then measure between the 
left (or bottom) of the page and the mark, and adjust the offsets accordingly 
in the web form.

hth

Jerome Alet