I have an old url for the generator. Would you please send me the new
location. I would like to test it in my shop.

Respectfully, 
Lisa Seay 
850/487-7777 ext. 2059


  
PLEASE NOTE:  Florida has a very broad public records law.  Most written
communications to or from state officials regarding state business are
considered to be public records and will be made available to the public
and the media upon request.  Your e-mail messages may, therefore, be
subject to public disclosure.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Jerome Alet
Sent: Thursday, January 08, 2009 2:45 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] [OFFTOPIC] Announce online generator for LTO
barcode labels

On Wed, Jan 07, 2009 at 07:40:50PM -0500, daniel996 wrote:
>

> As I am in Australia, we can't get any of the pre-sized labels your
>  utility is setup for (we can only get A4 sized media, not US).
>
> I bought Avery codde J4776, which is a single A4 heavy duty label
> sheet and I used a guillotine to cut the labels to size.

I don't have the exact reference of the labels we used, but we were in a
similar situation.

I've recently upgraded this generator to allow people to input a
positive or negative offset on the X and Y axis, to workaround the fact
that not all printers are created equal : special marks are now included
in the bottom left with their expected size printed, so you just have to
print one sheet (not necessarily real labels, a normal blank sheet is OK
provided it's in the Letter format, the format used by all supported
templates), then measure between the left (or bottom) of the page and
the
mark, and adjust the offsets accordingly in the web form.

hth

Jerome Alet