Re: [ADSM-L] Library manager/library conundrum
2008-10-02 12:36:17
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Paul Zarnowski
>Double check your element numbers and paths to the drives. Make sure
you
>have a path defined for each drive to each library-client server.
There are no drive definitions for the "remote" library in the library
client, and therefore no element numbers or paths to check. There is a
path in the library manager that connects each of the tape drives to the
library client, and as I mentioned there is obviously some communication
going on.
Here's another question that has been asked...
When a library client sends migrated data from disk to a tape drive
managed by a library manager, does the data flow on fiber from the
client to the tape drive directly, or does it flow across the LAN from
the client to the manager, and then on fiber from the manager to the
tape drive?
--
Mark Stapleton (mark.stapleton AT cdw DOT com)
CDW Berbee
System engineer
7145 Boone Avenue North, Suite 140
Brooklyn Park MN 55428-1511
763-592-5963
www.berbee.com
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
Message not available
- Re: [ADSM-L] Library manager/library conundrum, Paul Zarnowski
- Re: [ADSM-L] Library manager/library conundrum, Remco Post
- Re: [ADSM-L] Library manager/library conundrum, Fred Johanson
- Re: [ADSM-L] Library manager/library conundrum, Mark Stapleton
- Re: [ADSM-L] Library manager/library conundrum, Abbott, Joseph
- Re: [ADSM-L] Library manager/library conundrum, Remco Post
- [ADSM-L] Running multiple tsm instances - applying patch, Killam, Perpetua
- Re: [ADSM-L] Running multiple tsm instances - applying patch, Killam, Perpetua
- Re: [ADSM-L] Running multiple tsm instances - applying patch, Shawn Drew
|
|
|