Double check your element numbers and paths to the drives.  Make sure you
have a path defined for each drive to each library-client server.

At 11:47 AM 10/2/2008, Mark Stapleton wrote:

We're setting up a TS3310 tape library for two TSM servers  to share
through a library manager/library client arrangement.



We got successful server-to-server comm, and the library client calls
for tape mounts through the library manager successfully; we can see the
tape mounts happening. But it appears that the client never gets an
acknowledgement that the tape is mounted; we get



1,353 Migration           Disk Storage Pool DISKPRIM, Moved Files: 0,
Moved

                                           Bytes: 0, Unreadable Files:
0, Unreadable Bytes:

                                           0. Current Physical File
(bytes): 52,387,840

                                           Waiting for mount of scratch
volume (335

                                           seconds).



and the migration we're trying to run tries each drive in turn and gets



ANR8779E Unable to open drive \\.\tape4, error number=123.



before giving up after each drive mounts and then finally dismounts a
tape. There is a firewall between the two servers, but the servers are
obviously talking to each other; otherwise, no tapes would be mounted at
all.



Anyone seen this before?



--

Mark Stapleton (mark.stapleton AT cdw DOT com <mailto:mark.stapleton AT cdw DOT 
com> )

--
Paul Zarnowski                            Ph: 607-255-4757
Manager, Storage Services                 Fx: 607-255-8521
719 Rhodes Hall, Ithaca, NY 14853-3801    Em: psz1 AT cornell DOT edu