Hello All,

Thanks for your help!!

We have TSM 5.3.5/AIX 5.3.5/ IBM pSeries 55a/IBM 3584 (8-LTO1 & 8-
LTO2) drives. We have an IBM 2109 switch in the D32 cabinet and an IBM
2005-B16 switch in the L32 expansion cabinet.

I recently had an adapter replaced and when the new AIX devices were
recreated the AIX devices came back in a different order so the
locations/element numbers changed. I supposed I expected the device
assignments to come back the same since no physical changes were made to
the drive or adapter location only the adapter itself.   At any rate, I
need a way to easily map the AIX devices (rmt0, rmt1, etc..) to the
proper element numbers and thereby their location within the library for
service issues. The 3584 GUI doesn't show it (only element numbers). Is
there a way to do this readily?

Nicholas


IMPORTANT NOTICE:  This message and any included attachments are from East 
Jefferson General Hospital, and is intended only for the addressee(s), and may 
include Protected Health (PHI) or other confidential information.  If you are 
the intended recipient, you are obligated to maintain it in a secure and 
confidential manner and re-disclosure without additional consent or as 
permitted by law is prohibited.   If you are not the intended recipient, use of 
this information is strictly prohibited and may be unlawful.  Please promptly 
reply to the sender by email and delete this message from your computer. East 
Jefferson General Hospital greatly appreciates your cooperation.