Re: [ADSM-L] WWN under Linux
2007-10-05 10:27:35
Hi,
The /proc file system has the information you are looking for:
Server:~ # cat /proc/scsi/qla2xxx/* | grep adapter-port
scsi-qla0-adapter-port=210000e08b822690;
scsi-qla1-adapter-port=210100e08ba22690;
scsi-qla2-adapter-port=210000e08b81a2a8;
scsi-qla3-adapter-port=210100e08ba1a2a8;
scsi-qla4-adapter-port=210000e08b8195b5;
scsi-qla5-adapter-port=210100e08ba195b5;
scsi-qla6-adapter-port=210000e08b8121af;
scsi-qla7-adapter-port=210100e08ba121af;
The directory (qla2xxx) might be different, depending on the type of FC
HBA you are using.
Regards,
Kurt
> -----Oorspronkelijk bericht-----
> Van: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Namens
Richard
> Sims
> Verzonden: vrijdag 5 oktober 2007 15:57
> Aan: ADSM-L AT VM.MARIST DOT EDU
> Onderwerp: Re: [ADSM-L] WWN under Linux
>
> On Oct 5, 2007, at 8:47 AM, Sandeep Jain wrote:
>
> > Hi Richard,
> >
> > My TSM server is on Windows ...
>
> In Windows, the TSM device driver provides the command 'tsmdlst',
> which will report the WWN.
>
> Not sure about a Linux command: possibly, the 'lsscsi' command may do
> it, if that is installed on your Linux.
>
> Richard Sims
*** Disclaimer ***
Vlaamse Radio- en Televisieomroep
Auguste Reyerslaan 52, 1043 Brussel
nv van publiek recht
BTW BE 0244.142.664
RPR Brussel
http://www.vrt.be/disclaimer
|
|
|