Thanks.

Tapes were label during checkin. Few scratch tape also available.


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Robert Clark
Sent: Friday, July 13, 2007 6:02 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Cannot write to Tape (ANR8302E)

Were the tapes labeled at checkin?

On Thursday, July 12, 2007, at 06:02AM, "hshahizul" <hshahizul AT GMAIL DOT COM>
wrote:
>Hi Tsmer,
>
>
>
>I have install a new TSM Server 5.3.2 on Windows 2000.
>
>Tape library IBM 3583 having 2 libraries and 4 drives.
>
>Library connected to TSM Server via HBA card through SAN Switch.
>
>
>
>Driver for Tape Drive and Medium changer has been installed and can been
>seen via Device manager
>
>
>
>Library, Drive and path configured via Wizards and can be seen via command
>'q library', 'q drive' and 'q path'.
>
>
>
>Backup destination is to Diskpool. Next storagepool is Tapepool.
>
>
>
>While I want to migrate data from Diskpool to Tapepool.
>
>
>
>Console shows "Scratch Tape is mounted in Drive" and try to write and then
>ANR8302E error
>
>
>
>I/O error on Drive01(mt1.2.0.3) with volume SKP001L1 (OP=Write, Error
>Number=1235, CC=0, Key=0B, ACS=08, ASCQ=FFFFFF83
>Sence=70.00.0B.00.00.00.00.0A.00.00.00.00.08.83.00.00.00
>
>Description=An undetermined error has occurred). Refer to Appendix D in the
>'Messages' manual for recommended action.
>
>
>
>
>
>I have check on the error message for ACS=08 and ASCQ=83 but I cannot find
>for those number.
>
>
>
>I did try delete Library,Drive,Path and reconfigure manually (CLI instead
of
>Wizards). The still encounter the same error messages.
>
>
>
>I did try uninstalling driver and re-installing driver.
>
>I did try checkin cleaning tape.
>
>
>
>Please help me. I'm confused what next action.
>
>
>
>Tq
>
>