ADSM-L

Re: [ADSM-L] Trouble connecting to 3494 library

2007-04-12 19:09:36
Subject: Re: [ADSM-L] Trouble connecting to 3494 library
From: Steven Harris <steve AT STEVENHARRIS DOT INFO>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Fri, 13 Apr 2007 09:09:03 +1000
Gary

Try a commit statement before the line that is hanging, or run the
script on a session that was started with itemcommit.  I think its
probably a lock problem on the database.

HTH

Steve

Steven Harris
AIX and TSM Admin
Brisbane Australia

Lee, Gary D. wrote:
Configuration as follows

Tsm server v5.3.4 running on suse sles9 64 bit under vm 5.1

I have a macro defined to create a device class for 3592 cartridges,
define the library, drives, and paths to talk to the 3494 with two 3592
drives.

IBMatl, and IBMtape are both installed, mtlib works, I have issued

Mtlib -l3494a -vqV -V volser

Where volser is a real 3590 volume (used by another tsm server), and I
get back the appropriate information.

However, when I execute the macro below, when it gets to "defin path dax
quark . . . "
It just hangs.  I have let it sit for 15 minutes, just hangs there.

Server is licenced for tsmee, tsmbasic, and dataret.
Where next??
Macro follows:

---------------- cut here ------------------------
def DEVCLASS 3592 DEVTYPE=3592 FORMAT=DRIVE ESTCAPACITY=700g
MOUNTLIMIT=2 MOUNTWAIT=60 MOUNTRETENTION=0 PREFIX=ADSM LIBRARY=quark
SET SERVERNAME dax
DEF LIBRARY quark LIBTYPE=349X PRIVATECATEGORY=500 SCRATCHCATEGORY=502
SHARED=NO
def PATH dax quark SRCT=SERVER DESTT=LIBRARY DEVICE=3494a ONLINE=YES
def DRIVE quark 800 ONLINE=Yes SERIAL=auto
def DRIVE quark 801 ONLINE=Yes SERIAL=auto
def PATH dax 800 SRCT=SERVER DESTT=DRIVE LIBR=quark DEVICE=/dev/IBMtape0
ONLINE=YES
def PATH dax 801 SRCT=SERVER DESTT=DRIVE LIBR=quark DEVICE=/dev/IBMtape1
ONLINE=YES


---------------------- end cut here --------------------------



Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310









<Prev in Thread] Current Thread [Next in Thread>