ADSM-L

Re: [ADSM-L] Problems with Imation ultrium-2 (LTO-2) tapes?

2007-04-09 13:41:23
Subject: Re: [ADSM-L] Problems with Imation ultrium-2 (LTO-2) tapes?
From: Charles A Hart <charles_hart AT UHC DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Mon, 9 Apr 2007 12:40:55 -0500
We had an issue with Imation LTO3's.  Imation's tape cutting machine was
leaving tape artifacts behind, so when a tape got mounted the extra tape
piece / artifact would hang the drive...

Charles Hart
UHT - Data Protection
(763)744-2263
Sharepoint:
http://unitedteams.uhc.com/uht/EnterpriseStorage/DataProtection/default.aspx




Andrew Meadows <ameadows AT BMI DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
04/09/2007 12:26 PM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To
ADSM-L AT VM.MARIST DOT EDU
cc

Subject
Re: [ADSM-L] Problems with Imation ultrium-2 (LTO-2) tapes?






We saw a similar issue on LTO1's even with the latest firmware. We have
since upgraded to LTO3 drives and have not seen the issue since. Even
when reading the "trouble" LTO1's.

On Mon, 2007-04-09 at 13:18 -0400, Kauffman, Tom wrote:
> Is there any particular firmware I should be running in my IBM drives to
> work with Imation tapes? We've been running Fuji and IBM with no issues
> for years, but we put a group of new Imation tapes in Friday - and I've
> had write errors on 4 of them so far, and a read error on one that
> caused the drive to go not-ready to the point it won't soft-reset. I am
> back-level on drive firmware (I don't usaually fix anything that's
> working) so I thought I'd check that before I get an RMA from the vendor
> for the tapes.
>
>
>
> TIA
>
>
>
> Tom Kauffman
>
> NIBCO Inc.
>
>
> CONFIDENTIALITY NOTICE:  This email and any attachments are for the
> exclusive and confidential use of the intended recipient.  If you are
not
> the intended recipient, please do not read, distribute or take action in
> reliance upon this message. If you have received this in error, please
> notify us immediately by return email and promptly delete this message
> and its attachments from your computer system. We do not waive
> attorney-client or work product privilege by the transmission of this
> message.
>

********************************************
This message is intended only for the use of the Addressee and
may contain information that is PRIVILEGED and CONFIDENTIAL.

If you are not the intended recipient, you are hereby notified
that any dissemination of this communication is strictly prohibited.

If you have received this communication in error, please erase
all copies of the message and its attachments and notify us
immediately.

Thank you.
********************************************



This e-mail, including attachments, may include confidential and/or
proprietary information, and may be used only by the person or entity to
which it is addressed. If the reader of this e-mail is not the intended
recipient or his or her authorized agent, the reader is hereby notified
that any dissemination, distribution or copying of this e-mail is
prohibited. If you have received this e-mail in error, please notify the
sender by replying to this message and delete this e-mail immediately.

<Prev in Thread] Current Thread [Next in Thread>