OK - I tried the command
label libvol lb1.1.0.3 checkin=scratch search=bulk labels=barcode
and got the errors:
11/08/2006 13:54:24 ANR0984I Process 594 for LABEL LIBVOLUME
started in the
BACKGROUND at 13:54:24. (SESSION: 7295,
PROCESS: 594)
11/08/2006 13:54:24 ANR8799I LABEL LIBVOLUME: Operation for library
LB1.1.0.3
started as process 594. (SESSION: 7295,
PROCESS: 594)
11/08/2006 13:54:24 ANR8826E No Entry/Exit found on library
LB1.1.0.3.
(SESSION: 7295, PROCESS: 594)
11/08/2006 13:54:24 ANR0985I Process 594 for LABEL LIBVOLUME
running in the
BACKGROUND completed with completion state
FAILURE at
13:54:24. (SESSION: 7295, PROCESS: 594)
Does this mean that there is a problem with the IO slot and I have to
place the tape in the cartridges?
Regards
Paul
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> Behalf Of Lepre, James
> Sent: Wednesday, 8 November 2006 1:43 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Checking in new tapes on new TSM tape library
>
> Try the checkin command with search=bulk I think that is it
>
> ----- Original Message -----
> From: ADSM: Dist Stor Manager <ADSM-L AT VM.MARIST DOT EDU>
> To: ADSM-L AT VM.MARIST DOT EDU <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Tue Nov 07 21:39:34 2006
> Subject: [ADSM-L] Checking in new tapes on new TSM tape library
>
> I am trying to check in a new LTO3 tape in our new IBM 3582 TSM tape
> library that was installed a month ago.
>
>
>
> However it keeps failing. I would like to know if I am doing it
> correctly before logging a fault call with IBM.
>
> I am placing the new tape with the barcode label on it, in the IO slot
> on the right side of the unit.
>
>
>
> The command I execute is:
>
>
>
> tsm: ANLTSM>label libvol lb1.1.0.3 818ACFL2 checkin=scratch
>
> ANS8003I Process number 593 started.
>
>
>
> tsm: ANLTSM>q pr
>
>
>
> Process Process Description Status
>
> Number
>
> -------- --------------------
> -------------------------------------------------
>
> 593 LABEL LIBVOLUME ANR8804I Labelling volume 818ACFL2
in
> library
>
> LB1.1.0.3.
>
>
>
> tsm: ANLTSM>q req
>
> ANR8352I Requests outstanding:
>
> ANR8306I 153: Insert LTO volume 818ACFL2 R/W into the slot with
element
> number 4112
>
> of library LB1.1.0.3 within 60 minutes; issue 'REPLY' along with the
> request ID when
>
> ready.
>
>
>
> The error that appears in the log when it fails is:
>
>
>
> 11/08/2006 13:28:10 ANR8300E I/O error on library LB1.1.0.3
> (OP=8401C058,
>
> CC=314, KEY=FF, ASC=FF, ASCQ=FF,
> SENSE=**NONE**,
>
> Description=The source slot or drive was
empty
> in an
>
> attempt to move a volume). Refer to
Appendix
> D in the
>
> 'Messages' manual for recommended action.
> (SESSION: 7292,
>
> PROCESS: 593)
>
>
>
> 11/08/2006 13:28:10 ANR8942E Could not move volume 818ACFL2 from
> slot-element
>
> 4112 to slot-element 257. (SESSION: 7292,
> PROCESS: 593)
>
> 11/08/2006 13:28:10 ANR8802E LABEL LIBVOLUME process 593 for
> library LB1.1.0.3
>
> failed. (SESSION: 7292, PROCESS: 593)
>
>
>
> Regards
>
> Paul
>
>
>
>
>
>
>
>
>
>
>
> Paul Dudley
>
> ANL IT Operations Dept.
>
> ANL Container Line
>
> pdudley AT anl.com DOT au
>
>
>
>
>
>
>
>
>
>
>
> ANL - CELEBRATING 50 YEARS
>
> ANL DISCLAIMER
> This e-mail and any file attached is confidential, and intended solely
to the
> named addressees. Any unauthorised dissemination or use is strictly
> prohibited. If you received this e-mail in error, please immediately
notify the
> sender by return e-mail from your system. Please do not copy, use or
make
> reference to it for any purpose, or disclose its contents to any
person.
>
>
>
> ---------------------------------------------------------------
> Confidentiality Notice: The information in this e-mail and any
attachments
> thereto is intended for the named recipient(s) only. This e-mail,
including any
> attachments, may contain information that is privileged and
confidential and
> subject to legal restrictions and penalties regarding its unauthorized
disclosure
> or other use. If you are not the intended recipient, you are hereby
notified that
> any disclosure, copying, distribution, or the taking of any action or
inaction in
> reliance on the contents of this e-mail and any of its attachments is
STRICTLY
> PROHIBITED. If you have received this e-mail in error, please
immediately
> notify the sender via return e-mail; delete this e-mail and all
attachments from
> your e-mail system and your computer system and network; and destroy
any
> paper copies you may have in your possession. Thank you for your
> cooperation.
>
ANL - CELEBRATING 50 YEARS
ANL DISCLAIMER
This e-mail and any file attached is confidential, and intended solely to the
named addressees. Any unauthorised dissemination or use is strictly prohibited.
If you received this e-mail in error, please immediately notify the sender by
return e-mail from your system. Please do not copy, use or make reference to it
for any purpose, or disclose its contents to any person.
|