Hello,
I have a tape that I did a (audit volume xxx fix=yes) on.
It produced the results below. I had a similar problem with another
tape I did a Audit command but then the files keep showing up in
the server log as being skipped during the tape's reclamation from
what I read this is because files that are marked as damaged cannot
be moved by reclamation. Then I used the restore volume command
(I used preview first) after that completed successfully I could
not locate the volume in question. I checked the server log and was
marked destroyed??? I would like this volume to be used again
Is there a way to have it put back in the pool.
ANR8302E I/O error on drive RMT4 (/dev/rmt4) with volume
C00225 (OP=LOCATE, Error Number=5, CC=0, KEY=08, ASC=00,
ASCQ=05, SENSE=70.00.08.00.00.00.00.58.00.00.00.00.00.05
.FF.0A.50.70.40.00.00.09.01.91.00.3C.00.00.02.40.2B.A5.6
4.00.00.00.00.00.00.00.00.00.00.00.00.00.00.17.E2.9D.06.
A4.E2.30.00.00.00.00.91.57.24.01.29.85.14.A3.00.00.00.00
00.00.35.32.42.20.20.20.20.00.A0.41.4A.C3.F0.F0.F2.F2.F
6.80.00.20.00.00.01
ANR4132I Audit volume process ended for volume C00225; 14
files inspected, 4 damaged files deleted, 10 damaged
files marked as damaged, 0 objects updated.
ANR0987I Process 4061 for AUDIT VOLUME (REPAIR) running in
the BACKGROUND processed 14 items with a completion state
of SUCCESS at 09:47:00.
ANR8830E Internal 3592 drive diagnostics detect excessive
media failures for volume C00225 (MIM 60). Access mode is
now set to "read-only".
ANR8831W Because of media errors for volume C00225, data
should be removed as soon as possible.
Thanks in advance for any assistance!
TSM 5.3.2.3
AIX 5.3
|
