Hello,
A quick (?) question. My setup is the following:
TSM 5.3.2 server with a MSL6030 SCSI attached library (2 HP-Ultrium 3 drives).
The library has been defined in TSM and the labelling of the tapes went fine.
However a migrate of the diskpool towards the LTOPool fails with the following
messages:
ANR0984I Process 42 for MIGRATION started in the BACKGROUND at 08:45:30.
ANR2110I MIGRATE STGPOOL started as process 42.
ANR1000I Migration process 42 started for storage pool DISKPOOL manually,
highMig=90, lowMig=0, duration=No.
ANR8337I LTO volume HK3722L3 mounted in drive DRIVE1 (mt1.0.0.5).
ANR1340I Scratch volume HK3722L3 is now defined in storage pool LTOPOOL.
ANR0513I Process 42 opened output volume HK3722L3.
ANR8302E I/O error on drive DRIVE1 (mt1.0.0.5) with volume HK3722L3 (OP=WRITE,
Error Number=1117, CC=208, KEY=0B, ASC=47, ASCQ=03,
SENSE=70.00.0B.00.00.00.00.10.00.00.00.00.47.03.00.00.00.00.00.00.00.00.,
Description=Command aborted). Refer to Appendix D in the 'Messages' manual for
recommended action.
ANR1411W Access mode for volume HK3722L3 now set to "read-only" due to write
error.
ANR0515I Process 42 closed volume HK3722L3.
What am I missing here? The library configuration in TSM is as follows:
-The TSM device driver is used and the library is detected by the tsmdlst.exe
program as follows:
Tivoli Storage Manager -- Device List Utility
Licensed Materials - Property of IBM
5697-TSM (C) Copyright IBM Corporation 2000, 2005. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.
Computer Name: TSM-server
OS Version: 5.2
OS Build #: 3790
TSM Device Driver: TSMScsi - Running
2 HBAs were detected.
Manufacturer Model Driver Version Firmware
Description
----------------------------------------------------------------------------------------------------------------
QLogic Corporation QLA2340 ql2300.sys 9.0.2.11 (w32 IP) 3.03.12
QLogic QLA2340 Fibre Channel Adapter
QLogic Corporation QLA2340 ql2300.sys 9.0.2.11 (w32 IP) 0.00.00
QLogic QLA2340 Fibre Channel Adapter
TSM Name ID LUN Bus Port SSN WWN TSM
Type Device Identifier
----------------------------------------------------------------------------------------------------------------
lb0.0.0.5 0 0 0 5 - -
LIBRARY HP MSL6000 Series 0507
mt1.0.0.5 1 0 0 5 - - LTO
HP Ultrium 3-SCSI G24W
mt2.0.0.5 2 0 0 5 - - LTO
HP Ultrium 3-SCSI G24W
Completed in: 0 days, 0 hours, 0 minutes, 1 seconds.
-The library is defined in TSM with:
tsm: SRV-SPGR-BACKUP_SERVER1>q library f=d
Library Name: MSL6030
Library Type: SCSI
WWN: 00900D06254B8000
Serial Number: 2U2527002X
AutoLabel: No
Reset Drives: No
Last Update by (administrator): ADMIN
tsm: SRV-SPGR-BACKUP_SERVER1>q drive f=d
Library Name: MSL6030
Drive Name: DRIVE1
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2,ULTRIUMC,ULTRIUM
Write Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2
Element: 480
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 50060B000034589E
Serial Number: HU105252G0
Library Name: MSL6030
Drive Name: DRIVE2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2,ULTRIUMC,ULTRIUM
Write Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2
Element: 481
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 50060B000034586E
Serial Number: HU105252FH
tsm: SRV-SPGR-BACKUP_SERVER1>q path f=d
Source Name: SRV-SPGR-BACKUP_SERVER1
Source Type: SERVER
Destination Name: MSL6030
Destination Type: LIBRARY
Library:
Node Name:
Device: LB0.0.0.5
Source Name: SRV-SPGR-BACKUP_SERVER1
Source Type: SERVER
Destination Name: DRIVE1
Destination Type: DRIVE
Library: MSL6030
Node Name:
Device: mt1.0.0.5
Source Name: SRV-SPGR-BACKUP_SERVER1
Source Type: SERVER
Destination Name: DRIVE2
Destination Type: DRIVE
Library: MSL6030
Node Name:
Device: mt2.0.0.5
thanks,
Kurt
|