ADSM-L

Re: [Fwd: dsmc.nlm module does not show up memory]

2006-01-04 14:15:37
Subject: Re: [Fwd: dsmc.nlm module does not show up memory]
From: Timothy Hughes <Timothy.Hughes AT OIT.STATE.NJ DOT US>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 4 Jan 2006 14:15:31 -0500
Troy Thanks again!

I will have the Netware Admins try this.


Troy Frank wrote:

>  you can reboot a netware server from it's web-administration page
> (http://servername:8008).  It looks a little different depending on
> what version of netware you're running, but it's always a link
> somewhere along the left-hand margin.  Lets you down/restart the
> server even when the console is locked up (usually).
>
> >>> Timothy.Hughes AT OIT.STATE.NJ DOT US 1/4/2006 12:14:16 PM >>>
> Thanks Troy!
>
> When you say reboot the server from the web-admin page what
> exactly do you mean? Do you just mean a normal reboot
> of tha Novell Server.
>
> NW/OS 6.5
>
>
>
> Troy Frank wrote:
>
> > Sounds like the console hung while trying to load the client. The
> bad
> > news is it means you need to reboot the server from the web-admin
> page,
> > and you'll probably never know why it happened. The good news is
> that
> > it's usually rare. We've never had it happen upon loading the tsm
> > client, but we have occassionally seen it while unloading
> dsmcad.nlm.
> > It's not limited to tsm either. Other nlm's being loaded or unloaded
>
> > will occassionally hang the console screen (antivirus is famous for
> that
> > around here). If you've got a second console screen loaded you're
> ok,
> > otherwise you just need to reboot the server. Now if dsmc is
> > consistently causing this problem on this particular server, that
> would
> > be a whole different ball'a'wax.
> >
> > >>> Timothy.Hughes AT OIT.STATE.NJ DOT US 1/4/2006 10:33:03 AM >>>
> >
> > Just to follow up on my last email there are no errors regarding
> > DSMC.NLM
> > in the console.log or on the screen and it does not show up in
> memory.
> > the DSMCAD.NLM console screen that shows it is loading DSMC.NLM.
> >
> > IBM Tivoli Storage Manager
> > Client Acceptor - Built Nov 24 2004 22:41:54
> > Version 5, Release 3, Level 0.0
> > Dsmcad is working in Webclient Schedule mode.
> > ANS3000I HTTP communications available on port 1581.
> > Command will be executed
> > in 1 minute.
> > Time remaining until execution:
> > Executing scheduled command now.
> > Loading Module DSMC.NLM
> >
> > Thanks
> >
> > Confidentiality Notice follows:
> >
> > The information in this message (and the documents attached to it,
> if any)
> > is confidential and may be legally privileged. It is intended solely
> for
> > the addressee. Access to this message by anyone else is
> unauthorized. If
> > you are not the intended recipient, any disclosure, copying,
> distribution
> > or any action taken, or omitted to be taken in reliance on it is
> > prohibited and may be unlawful. If you have received this message in
>
> > error, please delete all electronic copies of this message (and the
> > documents attached to it, if any), destroy any hard copies you may
> have
> > created and notify me immediately by replying to this email. Thank
> you.Confidentiality Notice follows:
>
> The information in this message (and the documents attached to it, if
> any)
> is confidential and may be legally privileged. It is intended solely
> for
> the addressee. Access to this message by anyone else is unauthorized.
> If
> you are not the intended recipient, any disclosure, copying,
> distribution
> or any action taken, or omitted to be taken in reliance on it is
> prohibited and may be unlawful. If you have received this message in
> error, please delete all electronic copies of this message (and the
> documents attached to it, if any), destroy any hard copies you may
> have
> created and notify me immediately by replying to this email. Thank
> you.

<Prev in Thread] Current Thread [Next in Thread>