ADSM-L

Re: [Fwd: dsmc.nlm module does not show up memory]

2006-01-04 13:14:26
Subject: Re: [Fwd: dsmc.nlm module does not show up memory]
From: Timothy Hughes <Timothy.Hughes AT OIT.STATE.NJ DOT US>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 4 Jan 2006 13:14:16 -0500
Thanks Troy!

When you say reboot the server from the web-admin page what
exactly do you mean? Do you just mean a normal reboot
of tha Novell Server.

NW/OS 6.5



Troy Frank wrote:

> Sounds like the console hung while trying to load the client.  The bad
> news is it means you need to reboot the server from the web-admin page,
> and you'll probably never know why it happened.  The good news is that
> it's usually rare.  We've never had it happen upon loading the tsm
> client, but we have occassionally seen it while unloading dsmcad.nlm.
> It's not limited to tsm either.  Other nlm's being loaded or unloaded
> will occassionally hang the console screen (antivirus is famous for that
> around here).  If you've got a second console screen loaded you're ok,
> otherwise you just need to reboot the server.   Now if dsmc is
> consistently causing this problem on this particular server, that would
> be a whole different ball'a'wax.
>
> >>> Timothy.Hughes AT OIT.STATE.NJ DOT US 1/4/2006 10:33:03 AM >>>
>
> Just to follow up on my last email there are no errors regarding
> DSMC.NLM
> in the console.log or on the screen and it does not show up in memory.
> the DSMCAD.NLM console screen that shows it is loading DSMC.NLM.
>
> IBM Tivoli Storage Manager
> Client Acceptor - Built Nov 24 2004 22:41:54
> Version 5, Release 3, Level 0.0
> Dsmcad is working in Webclient Schedule mode.
> ANS3000I HTTP communications available on port 1581.
> Command will be executed
> in 1 minute.
> Time remaining until execution:
> Executing scheduled command now.
> Loading Module DSMC.NLM
>
> Thanks
>
> Confidentiality Notice follows:
>
> The information in this message (and the documents attached to it, if any)
> is confidential and may be legally privileged. It is intended solely for
> the addressee. Access to this message by anyone else is unauthorized. If
> you are not the intended recipient, any disclosure, copying, distribution
> or any action taken, or omitted to be taken in reliance on it is
> prohibited and may be unlawful. If you have received this message in
> error, please delete all electronic copies of this message (and the
> documents attached to it, if any), destroy any hard copies you may have
> created and notify me immediately by replying to this email. Thank you.