Troy Frank wrote:

Ok, so the gui way is more like this...
1.  Go to http://server1:1581 , click the "utilities" menu, and select "Node Access 
List"
2.  Log in with an admin user when it prompts you.
3.  In the "Node Access List" box, click the "Add" button.
4.  In the "Grant access to node" field of the next box, type "server2".
5.  Click the checkbox for "Include subdirectories".
6.  Click "OK" on this box, and on the previous one.

7.  Go to http://server2:1581 , click on the "utilities" menu, and select "Access 
Another Node".
8.  Type in "server1", and click "Set".
9.  Go to the "Restore" screen as normal.  You should now be able to select 
"server2" volumes as a destination for the server1 restore.

Troy

I will try this method first. Thanks again!

One thing  will I have to turn access off on  the nodes or I should not
have to do anything.

Timothy.Hughes AT OIT.STATE.NJ DOT US 6/13/2005 1:06:01 PM >>>

Troy Frank wrote:

On server1 you need to run this command (or a close variation of)...

dsmc set access backup * server2 *

This will give access to all of server1's backup data from server2.  I think 
the final * donotes what user is allowed to do the cross-server restore.  In 
this case it would be any user.

On server2, to initiate the restore would be similiar to this...

restore -fromnode=server1 -subdir=yes "server1/vol1:\*" "server2/vol1:\"

One note is that sometimes the destination needs quotes around it, sometimes it 
doesn't, depending on whether you run the command from the dsmc> prompt, or the 
novell command-line prompt.


Troy Frank
Network Services
University of Wisconsin Medical Foundation
608.829.5384

Timothy.Hughes AT OIT.STATE.NJ DOT US 6/13/2005 9:40:02 AM >>>

Hi all,

I know this has been discussed before and I have searched
the archives but cannot locate anything conclusive.

I am going to do a restore for a novell client who wants
to a backup from Server1\xxx\xxx the morning of june 9
restore to server2 \xxx\xxx

Can this be done from the TSM Administrative  GUI?
I believe I would change some things in server 1 DSM.opt
file?

Any help would be appreciated
Thanks

TSM version 5.3.1.2
TSM client 5.2.2

Confidentiality Notice follows:

The information in this message (and the documents attached to it, if any)
is confidential and may be legally privileged. It is intended solely for
the addressee. Access to this message by anyone else is unauthorized. If
you are not the intended recipient, any disclosure, copying, distribution
or any action taken, or omitted to be taken in reliance on it is
prohibited and may be unlawful. If you have received this message in
error, please delete all electronic copies of this message (and the
documents attached to it, if any), destroy any hard copies you may have
created and notify me immediately by replying to this email. Thank you.

Troy,

I don't  have access the clients command line I would like to
do this from this GUI.  Can this work somehow ?

Thanks again

Confidentiality Notice follows:

The information in this message (and the documents attached to it, if any)
is confidential and may be legally privileged. It is intended solely for
the addressee. Access to this message by anyone else is unauthorized. If
you are not the intended recipient, any disclosure, copying, distribution
or any action taken, or omitted to be taken in reliance on it is
prohibited and may be unlawful. If you have received this message in
error, please delete all electronic copies of this message (and the
documents attached to it, if any), destroy any hard copies you may have
created and notify me immediately by replying to this email. Thank you.