Re: EXPORT NODE directly to server

Hi Joni,

Please make the following changes and issue "ping server tsmprod"
command to see the result.
 
At Mainframe tsm server:
1. update server tsmprod hla=157.154.47.18

Regards, Samiran Das

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Joni Moyer
Sent: Wednesday, May 25, 2005 10:10 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: EXPORT NODE directly to server


Hello Richard!

I am a little confused about using the ping server command.  I have 2
AIX servers defined to each other and I can run the ping server command
to each and it does see a response, but I have defined TSMPROD to
b390.highmark.com and vice versa.  I am using the same admin id and
password on both and they reside on the same network.

Results from OS ping:
Pinging b390.highmark.com [157.154.93.185] with 32 bytes of data:

Reply from 157.154.93.185: bytes=32 time<10ms TTL=61
Reply from 157.154.93.185: bytes=32 time<10ms TTL=61
Reply from 157.154.93.185: bytes=32 time<10ms TTL=61
Reply from 157.154.93.185: bytes=32 time<10ms TTL=61

Ping statistics for 157.154.93.185:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate
round trip times in milli-seconds:
    Minimum = 0ms, Maximum =  0ms, Average =  0ms

C:\Documents and Settings\lidzr8v>
C:\Documents and Settings\lidzr8v>ping tsmprod

Pinging chrs144.highmark.com [157.154.47.18] with 32 bytes of data:

Reply from 157.154.47.18: bytes=32 time<10ms TTL=252
Reply from 157.154.47.18: bytes=32 time<10ms TTL=252
Reply from 157.154.47.18: bytes=32 time<10ms TTL=252
Reply from 157.154.47.18: bytes=32 time<10ms TTL=252

Ping statistics for 157.154.47.18:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate
round trip times in milli-seconds:
    Minimum = 0ms, Maximum =  0ms, Average =  0ms

Results of ping for adsm on TSMPROD
tsm: TSMPROD>ping server adsm
ANR1706I Ping for server 'ADSM' was able to establish a connection.

Results of ping for tsmprod from adsm
tsm: ADSM>ping server tsmprod
ANR1705W Ping for server 'TSMPROD' was not able to establish a
connection.

Any ideas?  Thanks!

********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
joni.moyer AT highmark DOT com
********************************



             "Richard Sims"
             <rbs AT BU DOT EDU>
             Sent by: "ADSM:
To
             Dist Stor                 ADSM-L AT VM.MARIST DOT EDU
             Manager"
cc
             <[email protected]
             .EDU>
Subject
                                       Re: EXPORT NODE directly to
server

             05/25/2005 09:39
             AM


             Please respond to
             "ADSM: Dist Stor
                 Manager"
             <[email protected]
                   .EDU>






On May 25, 2005, at 9:17 AM, Joni Moyer wrote:

> ...How can I test
> communication between the 2 servers without trying an export?...

The PING SERVER command is provided for that purpose. The command uses
the user ID and password of the administrative ID that issued the
command. If the administrator is not defined on the server being pinged,
the ping fails even if the server may be running.

Outside of TSM you can use the OS ping command to test TCP/IP
connectivity.

    Richard Sims
--------------------------------------------------------

If you are not an intended recipient of this e-mail, please notify the sender, 
delete it and do not read, act upon, print, disclose, copy, retain or 
redistribute it. Click here for important additional terms relating to this 
e-mail.     http://www.ml.com/email_terms/
--------------------------------------------------------