Re: disaster recovery drill: emergency!!!
2005-03-07 16:53:45
Hi Tom,
Gotcha! So I guess my devconfig file could look like this. And then when
it's up and it has restored the TSM server it will have the identical
definitions as I have at home and then I will just define more manual
drives, the paths to the drives and move from there? If I leave the other
definitions there after the TSM DB restore, will conflicts occur? Thank
you again!
DEFINE DEVCLASS DR_LTO2 DEVTYPE=LTO FORMAT=ULTRIUM2C
ESTCAPACITY=209715200K MOUNTLIMIT=DRIVES MOUNTWAIT=60
MOUNTRETENTION=5 PREFIX=ADSM LIBRARY=DRLIB
DEFINE DEVCLASS NASDEV DEVTYPE=NAS FORMAT=DRIVE
ESTCAPACITY=209715200K MOUNTLIMIT=DRIVES MOUNTWAIT=180
MOUNTRETENTION=0 PREFIX=ADSM LIBRARY=DRLIB
SET SERVERNAME TSMPROD
SET SERVERPASSWORD 1829fecd5fecda74
DEFINE LIBRARY DRLIB LIBTYPE=MANUAL
DEFINE DRIVE LTO1
DEFINE DRIVE LTO6
DEFINE PATH TSMPROD LTO1 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=DRLIB
DEVICE=/DEV/RMT#
DEFINE PATH NAS_SERVER_2 LTO6 SRCTYPE=DATAMOVER DESTTYPE=DRIVE
LIBRARY=DRLIB DEVICE=C64T0LO
********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
joni.moyer AT highmark DOT com
********************************
"Kauffman, Tom"
<KauffmanT@NIBCO.
COM> To
Sent by: "ADSM: ADSM-L AT VM.MARIST DOT EDU
Dist Stor cc
Manager"
<[email protected] Subject
.EDU> Re: disaster recovery drill:
emergency!!!
03/07/2005 04:35
PM
Please respond to
"ADSM: Dist Stor
Manager"
<[email protected]
.EDU>
Would you believe -- both?
Until the TSM database is restored and TSM started, you live off the
device config file; after the restore, you live off the definition in
the TSM database.
So -- change the device config file -- I usually go with a one-drive
manual library, as that's all I need to get the database restore
running. Once the database is restored, start TSM and make any changes
required to drives/paths/libraries. I've found it simpler to just delete
everything and then re-define to match the D/R environment.
Tom Kauffman
NIBCO, Inc
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Joni Moyer
Sent: Monday, March 07, 2005 4:14 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: disaster recovery drill: emergency!!!
Hey All!
I'm going to do a DR pre-test to see what I need to do concerning the
devconfig file. I currently have an External and ACSLS library
configured
with LTO2 tape drives, the device classes, paths, etc. When I go to DR
I
will have just the drives attached to the server. My question is:
before
I issue the dsmserv restore command to restore the TSM server from a
dbbackup, do I want to delete all references to the home TSM
configuration
and add the manual library, device class and paths or do I do
delete/update/add the configuration changes to the server after? I
have
everything planned out using my DRM plan, but this is the only portion
of
the plan that I am unsure of the order of operations. Thank you in
advance!
********************************
Joni Moyer
Highmark
Storage Systems
Work:(717)302-6603
Fax:(717)302-5974
joni.moyer AT highmark DOT com
********************************
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- disaster recovery drill: emergency!!!, Joni Moyer
- Re: disaster recovery drill: emergency!!!, Kauffman, Tom
- Re: disaster recovery drill: emergency!!!,
Joni Moyer <=
- Re: disaster recovery drill: emergency!!!, Kauffman, Tom
- Fw: disaster recovery drill: emergency!!!, Sung Y Lee
- Re: disaster recovery drill: emergency!!!, Kauffman, Tom
- Re: disaster recovery drill: emergency!!!, Kauffman, Tom
- Fw: disaster recovery drill: emergency!!!, Sung Y Lee
|
|
|