Hi,

Somehow your AIX server thinks the client can be reached by the private
network (default gateway). It seems to me to be something like a routing
problem within you network. Work around can be to add some routing
information in you AIX server.

Regards,

Karel
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: woensdag 26 januari 2005 16:49
To: ADSM-L AT VM.MARIST DOT EDU
Subject: IP address selection by TSM server

I asked this before, but never got any response.  I need to asked it
again, since the issue has arisen, again, and I can see this escalating
into a bigger problem.

The TSM AIX server is multi-homed (external/public normal 10/100
connection and internal/private 10/100/1000 private subnet).

A client contacts the TSM server on the "public" (128.172.x) connection.
Then the TSM server tries to contact the client via the "private",
192.168.x subnet.

Is there any way to tell the TSM server to contact the client via the
same IP connection that was used to contact it, unless the client has
tcpclientaddress specified to use the private network ?