Hi Guys,
Currently I'm having problem configuring TSM mt driver on Solaris 8 with STK
9940B tape drive. I tried many different mt.conf configuration but I still
got the following error:
# add_drv -v /usr/kernel/drv/mt
exit status = 0
devfsadm: driver failed to attach: mt
exit status = 11
Warning: Driver (mt) successfully added to system but failed to attach
Driver (mt) installed.
Following is the configuration that I have been tried:
name="mt" class="scsi" target=2 lun=0;
name="mt" parent="fp" target=0 lun=0 fc-port-wwn="210000e08b17938b";
name="mt" class="scsi" target=2 lun=0 hba="fca-pci1"
wwpn="210000e08b17938b";
I did try with different combination of target and lun number but it didn't
seem to work. Here is the information of my HBA card:
system SUNWqlc Qlogic ISP 2200/2202 Fibre Channel Device Driver
system SUNWqlcx Qlogic ISP 2200/2202 Fibre Channel Device Driver
(64 bit)
# pkginfo -l SUNWqlc
PKGINST: SUNWqlc
NAME: Qlogic ISP 2200/2202 Fibre Channel Device Driver
CATEGORY: system
ARCH: sparc
VERSION: 11.8.0,REV=2000.04.01.16.21
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Qlogic ISP 2200/2202 Fibre Channel Device Driver
PSTAMP: nsvr-30020040307201709
INSTDATE: Jul 21 2004 07:32
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 4 installed pathnames
2 shared pathnames
2 directories
1 executables
677 blocks used (approx)
# prtdiag
System Configuration: Sun Microsystems sun4u Sun Fire V240
System clock frequency: 160 MHZ
Memory size: 2GB
==================================== CPUs
====================================
E$ CPU CPU Temperature Fan
CPU Freq Size Impl. Mask Die Ambient Speed
Unit
--- -------- ---------- ------ ---- -------- -------- -----
----
MB/P0 1280 MHz 1MB US-IIIi 2.4 - -
MB/P1 1280 MHz 1MB US-IIIi 2.4 - -
================================= IO Devices
=================================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ----------------------------
--------------------
0 pci 66 MB pci108e,1648 (network)
0 pci 66 MB pci108e,1648 (network)
0 pci 33 MB isa/su (serial)
0 pci 33 MB isa/su (serial)
0 pci 33 MB pci10b9,5229 (ide)
0 pci 33 PCI2 SUNW,qlc-pci1077,2300 (scsi-+
0 pci 33 PCI1 SUNW,qlc-pci1077,2300 (scsi-+
0 pci 66 MB scsi-pci1000,21 (scsi-2)
0 pci 66 MB scsi-pci1000,21 (scsi-2)
0 pci 66 MB pci108e,1648 (network)
0 pci 66 MB pci108e,1648 (network)
0 pci 66 PCI0 SUNW,XVR-100 (display) SUNW,375-3181
0 pci 33 7 isa/rmc-comm-rmc_comm (seria+
# cfgadm -al
Ap_Id Type Receptacle Occupant
Condition
c0 scsi-bus connected configured
unknown
c0::dsk/c0t0d0 disk connected configured
unknown
c1 scsi-bus connected unconfigured
unknown
c2 scsi-bus connected configured
unknown
c2::dsk/c2t0d0 CD-ROM connected configured
unknown
c3 fc-fabric connected configured
unknown
c3::500104f0006fd113 tape connected configured
unknown
c3::500104f0006fd11f tape connected configured
unknown
c3::500104f0006fd12e tape connected configured
unknown
c3::500104f000775529 tape connected configured
unknown
c3::500601601060288e disk connected configured
unknown
c3::500601691060288e disk connected configured
unknown
c4 fc-fabric connected configured
unknown
c4::500601611060288e disk connected configured
unknown
c4::500601681060288e disk connected configured
unknown
root@hspcsuncrm5 # luxadm -e dump_map /dev/fc/fp0
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 10ee2 e2 500104f0006fd12e 500104f0006fd12d 0x1 (Tape device)
1 11ee8 e8 500104f0006fd11f 500104f0006fd11e 0x1 (Tape device)
2 11fe4 e4 500104f0006fd113 500104f0006fd112 0x1 (Tape device)
3 50000 0 500601691060288e 500601609060288e 0x0 (Disk device)
4 51000 0 500601601060288e 500601609060288e 0x0 (Disk device)
5 70f55 55 500104f000775529 500104f000775528 0x1 (Tape device)
6 51500 0 210000e08b17938b 200000e08b17938b 0x1f (Unknown
Type,Host Bus Adapter)
How can I fix this problem? Please help!
Thanks in advance,
RC.
|