Re: seek problems on LTO2 tapes
2004-09-16 10:16:02
Sorry, Yes the tape is still good. No need to replace.
-----Original Message-----
From: Rushforth, Tim
Sent: Thursday, September 16, 2004 9:15 AM
To: 'ADSM: Dist Stor Manager'
Subject: RE: seek problems on LTO2 tapes
Yes. Yes.
As Dave posted, it can be fixed by rebuilding the CM. This is done by
reading the entire tape (or using NTUTIL Space to EOD). A scratch tape that
is rewritten to will have the CM rewritten.
And upgrade the microcode to prevent future occurrences.
-----Original Message-----
From: Bill Boyer [mailto:bill.boyer AT VERIZON DOT NET]
Sent: Wednesday, September 15, 2004 5:59 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: seek problems on LTO2 tapes
If you can move the data off one of these corrupted tapes, is that tape good
or should it be replaced? If there is no data and is goes scratch, the next
mount will be to write on the tape. Does that rebuild the index?
Bill Boyer
DSS, Inc.
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- seek problems on LTO2 tapes, Bill Boyer
- Re: seek problems on LTO2 tapes, Loon, E.J. van - SPLXM
- Re: seek problems on LTO2 tapes, Dave Canan
- Re: seek problems on LTO2 tapes, Rushforth, Tim
- Re: seek problems on LTO2 tapes, Dave Canan
- Re: seek problems on LTO2 tapes, Rushforth, Tim
- Re: seek problems on LTO2 tapes, Paul Zarnowski
- Re: seek problems on LTO2 tapes, Rushforth, Tim
- Re: seek problems on LTO2 tapes,
Rushforth, Tim <=
|
|
|