ADSM-L

Re: BA client 5.2.2 and Server 2003

2004-04-19 18:20:42
Subject: Re: BA client 5.2.2 and Server 2003
From: Mike Bantz <mbantz AT RSINC DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Mon, 19 Apr 2004 16:14:08 -0600
Dunno if these will show up on the board, but thanks for looking into this!

 - Mike Bantz

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Andrew Raibeck
Sent: Monday, April 19, 2004 3:23 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: BA client 5.2.2 and Server 2003

Hi Mike,

You should just be able to copy and paste from a Windows OS prompt, like
this (note that I quit the operation quickly to minimize the size of the
example):

**************************************************
C:\TSM\baclient>dsmc i f:
IBM Tivoli Storage Manager
Command Line Backup/Archive Client Interface - Version 5, Release 2, Level
2.0
(c) Copyright by IBM Corporation and other(s) 1990, 2003. All Rights
Reserved.

Node Name: STORMAN
Session established with server STORMAN: Windows
  Server Version 5, Release 2, Level 2.1
  Server date/time: 04/19/2004 14:10:12  Last access: 04/19/2004 06:55:24


Incremental backup of volume 'f:'


Press 'Q' to end operation, any other key to continue.
Successful incremental backup of '\\storman\f$'


Total number of objects inspected:      213
Total number of objects backed up:        0
Total number of objects updated:          0
Total number of objects rebound:          0
Total number of objects deleted:          0
Total number of objects expired:          0
Total number of objects failed:           0
Total number of bytes transferred:        0  B
Data transfer time:                    0.00 sec
Network data transfer rate:            0.00 KB/sec
Aggregate data transfer rate:          0.00 KB/sec
Objects compressed by:                    0%
Elapsed processing time:           00:00:04
ANS1074W *** User Abort ***


C:\TSM\baclient>
**************************************************

With this kind of output, you can see *exactly* what I see. Alternatively
you can redirect output to a file, like this:

   dsmc i f: > dsmc.out 2>&1

Then attach the dsmc.out file (make sure there is something in it, first!).
Zip it up if it gets too big.

So if you could post that type of output from the "dsmc i d:" command,
*plus* attach output from the following, then that would help:

   dsmc query systeminfo dsmoptfile options inclexcl errorlog policy osinfo

The latter command stores the output in dsminfo.txt (same directory as
dsmc.exe). This should give us a good picture of your client configuration.

Regards,

Andy

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew
Raibeck/Tucson/[email protected] Internet e-mail: storman AT us.ibm DOT com

The only dumb question is the one that goes unasked.
The command line is your friend.
"Good enough" is the enemy of excellence.



Mike Bantz <mbantz AT RSINC DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
04/19/2004 12:49
Please respond to
"ADSM: Dist Stor Manager"


To
ADSM-L AT VM.MARIST DOT EDU
cc

Subject
Re: BA client 5.2.2 and Server 2003






I'm running this by typing 'incr' at the baclient command-line interface
while logged in as the domain admin. Also just tried this as the local 
admin
with the same effect.

Not quite sure how to copy what you need from "dsmc i d:", though. It 
comes
back with:

ANS1898I ***** Processed 1,000 files *****
.
.
ANS1898I ***** Processed 16,500 files *****
Successful incremental backup of '\\maine\d$'

Objects inspected       16,923
Backed up                    0
etc etc etc

Opening up the GUI, I have the directory structure available to me as a 
part
of the restore - just no files. We ran into this with another issue: 
trying
to back up two NetApps using mapped drives. We'd get all the directories,
just no files from those directories. That was solved by running the 
backup
as the domain admin, not another account with domain admin privileges.


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Andrew Raibeck
Sent: Monday, April 19, 2004 11:21 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: BA client 5.2.2 and Server 2003

Does the account used to back up D: have permissions to the root of the
drive?

It would help if you could provide some explicity info about the problem. 
For example, output from "dsmc i d:" would be useful.

Regards,

Andy

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew
Raibeck/Tucson/[email protected] Internet e-mail: storman AT us.ibm DOT com

The only dumb question is the one that goes unasked.
The command line is your friend.
"Good enough" is the enemy of excellence.



Mike Bantz <mbantz AT RSINC DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
04/19/2004 09:14
Please respond to
"ADSM: Dist Stor Manager"


To
ADSM-L AT VM.MARIST DOT EDU
cc

Subject
Re: BA client 5.2.2 and Server 2003






Just installed 5.2.2.9 with the same dsm.opt file. No luck. It will *not*
back up that drive.

Just no errors any more...

Mike Bantz
Systems Administrator
Research Systems, Inc

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Stefan Holzwarth
Sent: Monday, April 19, 2004 9:15 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: AW: BA client 5.2.2 and Server 2003


There are many problems - also that you described with the levels before
5.2.2.5
We use 5.2.2.9 and it seems that this version is quiet ok.
For open userprofiles we use ntbackup per preschedcmd, since TSM does not
support that at the moment on Windows 2003.

Kind Regards

Stefan Holzwarth

----------------------------------------------------------------------------
--
Stefan Holzwarth
ADAC e.V. (Informationsverarbeitung - Systemtechnik - Basisdienste)
Am Westpark 8, 81373 München, Tel.: (089) 7676-5212, Fax: (089) 76768924
mailto:stefan.holzwarth AT adac DOT de


> -----Ursprüngliche Nachricht-----
> Von: Mike Bantz [mailto:mbantz AT RSINC DOT COM]
> Gesendet: Montag, 19. April 2004 16:36
> An: ADSM-L AT VM.MARIST DOT EDU
> Betreff: BA client 5.2.2 and Server 2003
> 
> 
> I've just installed the 5.2.2 baclient on a Server 2003 
> machine, trying to
> back up to a Version 5, Release 2, Level 0.2 TSM server.
> 
> The dsm.opt file looks like this:
> 
>         PASSWORDACCESS  GENERATE
>         TCPSERVERADDRESS        10.17.10.13
>         dirmc directory
>         ERRORLOGRETENTION       5 D
>         SCHEDLOGRETENTION       5 D
> 
> This opt file backs up every local drive on any other machine 
> we've got it
> on.
> 
> I'd just like to back up the C$ and D$, default mgmt class. 
> Problem is, the
> server will back up the C$, "process" the D$, then kick back an error
> ANS1950E, that Backup via Windows Shadow Copy failed.
> 
> I cannot query the error on the server (no text found).
> 
> I've tried explicity including the d:\temp directory, etc to no avail.
> 
> This is something obvious, isn't it? :-)
> 
> Mike Bantz
> Systems Administrator
> Research Systems, Inc

Attachment: dsmc.out
Description: Binary data

Attachment: dsminfo.txt
Description: Text document

<Prev in Thread] Current Thread [Next in Thread>