Re: Library sharing
2004-03-31 10:54:43
Hi,
Can be, but don't have to be the same... In the past I saw some machines
with different device names for the same devices and it worked well with
ITSM (on Windows).
Regards,
Karel
-----Oorspronkelijk bericht-----
Van: Amos Hagay [mailto:amos AT CCC.CO DOT IL]
Verzonden: woensdag 31 maart 2004 17:46
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: Re: Library sharing
Hi,
>From my experience with 3584 Library, the rmt devices should be
The same on both machines e.g. server_1 /dev/rmt1 /dev/rmt2 etc...
And also on the library client /dev/rmt1 ...
AH
-----Original Message-----
From: Zoltan Forray/AC/VCU [mailto:zforray AT VCU DOT EDU]
Sent: Wednesday, March 31, 2004 5:46 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Library sharing
Trying to get ATL library sharing working between two TSM AIX servers.
I think I finally got the definitions correct......at least they seem to
function.........
However, I can't get the library client (capella) to use the drives. Every
time it does, I get these errors in the activity log:
03/31/2004 09:54:13 ANR8779E Unable to open drive /dev/rmt1, error
number=46.
(SESSION: 2663, PROCESS: 11)
The "library manager" says the tape is mounted and ready.....
03/31/2004 09:52:25 ANR8337I 3590 volume 070330 mounted in drive
ATL-DRIVE2 (/dev/rmt1).
03/31/2004 09:52:25 ANR9791I Volume 070330 in library 3494ATL ownership
is changing from TSM-AGENA to TSM-CAPELLA.
Any suggestions on what might be wrong ?
AIX messages says the "-46" is "Drive Not Ready".
These are FC / SAN attached 3590E1A drives.
|
|
|