ADSM-L
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: GIGE connectivity via TSM

2004-03-23 11:07:20
Subject: Re: GIGE connectivity via TSM
From: Zoltan Forray/AC/VCU <zforray AT VCU DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 23 Mar 2004 11:07:28 -0500

My understanding of TCPCLIENTADDRESS is different. We use it for multi-homed boxes that have a separate NIC that connects to a private, internal, GIGE subnet so that the backups are pushed across it versus the public subnet.  

To verify this, when I check the details for a TSM node (on the TSM server), the IP address it shows changes to the private subnet, not the public one that was previously being used.

Andrew Raibeck......care to confirm this ?




Dwight Cook <cookde AT US.IBM DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>

03/23/2004 10:49 AM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
Re: GIGE connectivity via TSM










tcpclientaddress only sets the initial address for the server to come in
on.... (last I remember)
beyond that, standard system/network routing takes over.
I'm still at 4.2 & 5.1 (moving to 5.2 in the next couple of months) but we
currently put route statements on the client nodes to ensure they exit out
their proper interfaces to access the tsm server(s).


Dwight E. Cook
Systems Management Integration Professional, Advanced
Integrated Storage Management
TSM Administration
(918) 925-8045



                                                                     
                     "Wholey, Joseph                                  
                     (IDS DM&DS)"             To:       ADSM-L AT VM.MARIST DOT EDU
                     <joseph_wholey@ML        cc:                    
                     .COM>                    Subject:  GIGE connectivity via TSM
                     Sent by: "ADSM:                                  
                     Dist Stor                                        
                     Manager"                                        
                     <[email protected]                                
                     .EDU>                                            
                                                                     
                                                                     
                     03/23/2004 09:28                                
                     AM                                              
                     Please respond to                                
                     "ADSM: Dist Stor                                
                     Manager"                                        
                                                                     
                                                                     




This should be an easy one for most...  I have a Solaris client running TSM
v5.2.  It will be getting a GIGE card.  What is the best/recommended way to
ensure data is traversing the GIGE card (in both
directions... outbound/inbound) if it is not set up as the default NIC on
the client.  thx.

==============================================================================


If you are not an intended recipient of this e-mail, please notify
the sender, delete it and do not read, act upon, print, disclose,
copy, retain or redistribute it.

Click here for important additional terms relating to this e-mail.
    <http://www.ml.com/email_terms/>

==============================================================================
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: GIGE connectivity via TSM, Wholey, Joseph (IDS DM&DS)
Next by Date:  Re: TDPO for Oracle, Davidson, Becky
Previous by Thread:  Re: GIGE connectivity via TSM, Dwight Cook
Next by Thread:  Re: GIGE connectivity via TSM, Wholey, Joseph (IDS DM&DS)
Indexes:  [Date] [Thread] [Top] [All Lists]