I just installed on at a site, but the are using Autovault instead of DRM.
Autovault is configured to check out the volumes REM=NO CHECKL=NO. Then they
just open the library, pull out the tapes called for by Autovault and put a
scratch tape in the slot. then I have a scheduled checkin SEARCH=YES
CHECKL=B for later in the day. The only difficult part is the tapes in the
back of the 3582. You have to make sure you park the picker first. The
manual says that's not the suggested way of doing it, but TSM/Autovault
doesn't support their little buld load/unload funtion.

Bill Boyer
DSS, Inc.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Alex den Hartog
Sent: Monday, March 08, 2004 4:26 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Automated DRM volume handling LTO 3582 library


Hi listers,

Is anyone using this new LTO library from IBM with TSM / DRM? And if so, how
are you performing your automated daily checkin / checkout routines for your
DRM volumes?

Any tips would be very much appreciated!

Thanks,
Alex

_________________________________________________________________
MSN Search, for accurate results! http://search.msn.nl